classid or flowid ? which is better ?
hi there,
forgot one question. Which is better to use in filter -> classid to direct the traffic to the leaf-class or to
use flowid to direct it to the leaf-class-child-qdisc ?!
what is the difference ?
tia
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 6 lines · raptor
hi there,
forgot one question. Which is better to use in filter -> classid to direct the traffic to the leaf-class or to use flowid to direct it to the leaf-class-child-qdisc ?!
what is the difference ?
classid = flowid. You can use both.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 8 lines · raptor
Quoted 6 lines
hi there,
forgot one question. Which is better to use in filter -> classid to direct the traffic to the leaf-class or to use flowid to direct it to the leaf-class-child-qdisc ?!
what is the difference ?classid = flowid. You can use both.
]- doesnt seem the same.. u can't use flowid to point to class or classid to point to qdisc ?! The question is does it have some other implication ! say speed :"!
leaf-class <--classid
|---- qdisc <----flowid
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 8 lines · raptor
Quoted 8 lines · raptor
Quoted 6 lines
hi there,
forgot one question. Which is better to use in filter -> classid to direct the traffic to the leaf-class or to use flowid to direct it to the leaf-class-child-qdisc ?!
what is the difference ?
Quoted 5 lines
Quoted 1 line
classid = flowid. You can use both.
]- doesnt seem the same.. u can't use flowid to point to class or classid to point to qdisc ?! The question is does it have some other implication !
say speed :"!
I don't understand what you want to say, but from the tc source :f_fw.c:
if (matches(*argv, "classid") = 0 ||
matches(*argv, "flowid") = 0) {
f_u32.c:
} else if (matches(*argv, "classid") = 0 ||
strcmp(*argv, "flowid") = 0) {
f_route.c:
} else if (matches(*argv, "classid") = 0 ||
strcmp(*argv, "flowid") = 0) {Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/