Skip to contentSkip to conversation

Starting IPTables

LARTC Carles Torres Nuñez 2 participants 2 messages Nov 18, 2003

lore
Share & tools
lore
#0 lore raw

I have found this problem while trying to see the active rules on IPTABLES:

[root@worf root]# iptables --list /lib/modules/2.4.7-10/kernel/net/ipv4/netfilter/ip_tables.o: init_module:
Device or resource busy
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters /lib/modules/2.4.7-10/kernel/net/ipv4/netfilter/ip_tables.o: insmod /lib/modules/2.4.7-10/kernel/net/ipv4/netfilter/ip_tables.o failed /lib/modules/2.4.7-10/kernel/net/ipv4/netfilter/ip_tables.o: insmod ip_tables failed
iptables v1.2.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.

I'm using now a firewall script that uses ipchains and I'd like to change it to run with iptables.
Could my running ipchains script be "the blame" of this?

Carles Torres Nuñez
Dpt. Informatica
Pymag, S.A.

[email protected]
www.pymag.com

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw

No.
Try with new kernel.
lsmod?

Quoted 24 lines · Carles Torres Nuñez

I have found this problem while trying to see the active rules on IPTABLES:

[root@worf root]# iptables --list /lib/modules/2.4.7-10/kernel/net/ipv4/netfilter/ip_tables.o: init_module:
Device or resource busy
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters /lib/modules/2.4.7-10/kernel/net/ipv4/netfilter/ip_tables.o: insmod /lib/modules/2.4.7-10/kernel/net/ipv4/netfilter/ip_tables.o failed /lib/modules/2.4.7-10/kernel/net/ipv4/netfilter/ip_tables.o: insmod ip_tables failed
iptables v1.2.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.

I'm using now a firewall script that uses ipchains and I'd like to change it to run with iptables.
Could my running ipchains script be "the blame" of this?

Carles Torres Nuñez
Dpt. Informatica
Pymag, S.A.

Quoted 9 lines

[email protected]
www.pymag.com

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/