Skip to contentSkip to conversation

Equal-cost multipath

LARTC Brett Cavé 2 participants 2 messages Nov 19, 2003 – Nov 23, 2003

lore
Share & tools
lore
#0 lore raw

Hi all,

I have a network with a Redhat 8.0 gateway. It has 3 nic's, 1 connected to the lan, and the other 2 connected to ADSL routers. I have configured split access with load-balancing, using ip rules and ip routes (with weight 1 for both external interfaces).

The load-balancing is working to a degree, but is not giving me exactly what I want - the gateway is caching routes, so if I download a large file from a site, the route to that site is cached, and it is all traffic is routed down 1 ADSL connection. What I would like to do is split the traffic, so that all traffic is split equally down both lines (equal cost multipath I think). Is what I am trying to do possible, or should it be working as I have configured it? Is it possible to specify to the kernel not to cache routes?

Regards,

Brett Cavé

Nerds On-Site
Email: [email protected]

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw

On Wednesday 19 November 2003 03:59, Brett Cavé scrawled:

Quoted 16 lines

Hi all,

I have a network with a Redhat 8.0 gateway. It has 3 nic's, 1 connected to the lan, and the other 2 connected to ADSL routers. I have configured split access with load-balancing, using ip rules and ip routes (with weight 1 for both external interfaces).

The load-balancing is working to a degree, but is not giving me exactly what I want - the gateway is caching routes, so if I download a large file from a site, the route to that site is cached, and it is all traffic is routed down 1 ADSL connection. What I would like to do is split the traffic, so that all traffic is split equally down both lines (equal cost multipath I think). Is what I am trying to do possible, or should it be working as I have configured it? Is it possible to specify to the kernel not to cache routes?

Quoted 7 lines

Regards,

Brett Cavé

Nerds On-Site
Email: [email protected]

You could use the nano-patch (http://www.ssi.bg/~ja/nano.txt) and the equalize option in the multipath route configuration. but from what i understand, the traffic is coming 'into' your machine, the splitting of the incoming traffic has to occur on the other end of the connection. The nano patch will equalize the traffic that goes 'out' of your system. So if somebody downloads data from the gateway, then the data will be split equally (or according to the weights) over the outgoing connections.

hope that helps,
ashok
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/