Skip to contentSkip to conversation

tc and kernel 2.6.0

LARTC [email protected] 3 participants 3 messages Nov 26, 2003 – Nov 27, 2003

lore
Share & tools
lore
#1 lore raw
Quoted 5 lines · On Wednesday, 26 November 2003, at 15:12:16 +0100…

I successfully used the latest tc tool (version 3.12) with a linux 2.4 kernel. Now I switched to 2.6.0 and had the problem that I could'nt define any queues with tc. Do I need to download a newer version or is there anything like a patch?

I have used "tc" in Linux kernels 2.6.x without problems, using the "iproute" package that comes standard with Debian Sid. This package contains a compiled version of "iproute-20010824", maybe just a recompile against current 2.6.x headers is what you need.

Greetings.

Signature · 5 lines
Jose Luis Domingo Lopez
Linux Registered User #189436     Debian Linux Sid (Linux 2.6.0-test10-mm1)
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to [email protected]

Hi,

I have used "tc" with kernel 2.6.0.x without any problems which comes with Slackware Linux.
And I had switched to patched "tc" by Patrcik McHardy with hfsc support and again it works without any problems.

Remus

----- Original Message -----
From: <[email protected]>
To: <[email protected]>
Sent: Wednesday, November 26, 2003 2:12 PM
Subject: [LARTC] tc and kernel 2.6.0

Quoted 10 lines

I successfully used the latest tc tool (version 3.12) with a linux 2.4 kernel. Now I switched to 2.6.0 and had the problem that I could'nt define any queues with tc. Do I need to download a newer version or is there anything like a patch?

Thanks, Seb
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/