tc -s class problem (with cbq only)
I have changed kernel to 2.2.22 and have a problem:
#tc -s class ls dev eth3
and
#tc show class dev eth3
and
#tc -s -d class ls dev eth3
shows me NOTHING when i use CBQ queues on interface !!!
i can olny watch queues (QDISC) with:
#tc -s qdisc ls dev eth3
(this is working OK, as earlier)
I tried many of tc bin's (from devik, compiled, old , etc) - nothing help.
the tc -s class ls dev eth0 works fine, when i used HTB queues.
How to solve that problem ?
this is trace of problem:open("/proc/net/psched", O_RDONLY) = 3fstat64(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0 old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40014000read(3, "000c8000 000f4240 000f4240 00000"..., 4096) = 36
close(3) = 0 munmap(0x40014000, 4096) = 0 socket(PF_NETLINK, SOCK_RAW, 0) = 3
bind(3, {sin_family¯_NETLINK, {sa_family, sa_data="\0\0\0\0\0\0\0\0\0\0@\25\6\10"}, 12) = 0getsockname(3, {sin_family¯_NETLINK, {sa_family, sa_data="q\3375<\0\0\0\0\0\0@\25\6\10"}, [12]) = 0
time(NULL) = 1070634212
sendto(3, "\24\0\0\0\22\0\1\3\345\224\320?\0\0\0\0\0006\1@", 20, 0, {sin_family¯_NETLINK, {sa_family, sa_data="\0\0\0\0\0\0\0\0\0\0\24\0\0\0"}, 12) = 20
recvmsg(3, {msg_name(12)={sin_family¯_NETLINK, {sa_family, sa_data="\21\300\0\0\0\0\0\0\0\0\264\0\0\0"}, msg_iov(1)=[{"\264\0\0\0\20\0\2\0\345\224\320?5
recvmsg(3, {msg_name(12)={sin_family¯_NETLINK, {sa_family, sa_data="\301\367\0\0\0\0\0\0\0\0\24\0\0\0"}, msg_iov(1)=[{"\24\0\0\0\3\0\2\0\345\224\320?5<\
sendmsg(3, {msg_name(12)={sin_family¯_NETLINK, {sa_family, sa_data="\0\0\0\0\0\0\0\0\0\0$\0\0\0"}, msg_iov(2)=[{"$\0\0\0*\0\1\3\346\224\320?\0\0\0\0", 1
recvmsg(3, {msg_name(12)={sin_family¯_NETLINK, {sa_family, sa_data="\301\367\0\0\0\0\0\0\0\0\24\0\0\0"}, msg_iov(1)=[{"\24\0\0\0\3\0\2\0\346\224\320?5<\_exit(0) = ?
Why does it exit's here ?? if i'm sure that there are queues/classes on that interface:
here i past them :
# tc -s qdisc ls dev eth3 |head -n 10 qdisc tbf 84e3: rate 160Kbit burst 300Kb peakrate 10Mbit minburst 1600b lat 189.2ms Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
qdisc tbf 84e2: rate 640Kbit burst 300Kb peakrate 10Mbit minburst 1600b lat
189.2ms
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
qdisc tbf 84e1: rate 150Kbit burst 300Kb peakrate 10Mbit minburst 1600b lat
189.2ms
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
qdisc tbf 84e0: rate 600Kbit burst 300Kb peakrate 10Mbit minburst 1600b lat
189.2ms
PLEASE HELP ME !
A.Binder
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 10 lines
I have changed kernel to 2.2.22 and have a problem:
#tc -s class ls dev eth3
and
#tc show class dev eth3
and
#tc -s -d class ls dev eth3shows me NOTHING when i use CBQ queues on interface !!!
I found where is a problem,,, It occurs only when i use only in one or more
class a TBF queue discipline.
Even when i use the sample from LARTC.org script.
Instead of : (the actual CBQ script)
##tc qdisc add dev $DEV parent 1:20 handle 20: sfq perturb 10 i use a tbf queue:
#tc qdisc add dev $DEV parent 1:20 handle 30: tbf rate 20kbit buffer 1600 limit 3000
and after that
tc -s class ls dev $DEV shows NOTHING !!!
if I use a SFQ queue, tc -s class ls dev $DEV works OK.
I'm not doing some stupid mistake on that...
A.Binder
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/