imprecision in bandwidth measurement
Hi,
I am experiencing a curious phenomenon. I limited the bandwidth for a specific client to 750KBit. It works well despite of the fact that the client always gets a little bit more bandwidth (around 770KBit to 780KBit). I used different bandwidth and traffic measurement tools like ntop, nettimer or ipac. All show the same, a little bit more bandwidth than allowed. The factor by which the specified bandwidth is increased seems to be proportional to the specified bandwidth. But where is the problem. Is it only a different way of traffic measurement or is this a bug? Maybe, does it depend on some command arguments to create the classes?
Tilman
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 11 lines · Tilman Giese (Global View)
Hi,
I am experiencing a curious phenomenon. I limited the bandwidth for a specific client to 750KBit. It works well despite of the fact that the client always gets a little bit more bandwidth (around 770KBit to 780KBit). I used different bandwidth and traffic measurement tools like ntop, nettimer or ipac. All show the same, a little bit more bandwidth than allowed. The factor by which the specified bandwidth is increased seems to be proportional to the specified bandwidth. But where is the problem. Is it only a different way of traffic measurement or is this a bug? Maybe, does it depend on some command arguments to create the classes?
Can you post us your tc commands ?
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 3 lines · Stef Coene
Can you post us your tc commands ?
# tc qdisc add dev eth0 root handle 1: cbq bandwidth 10MBit allot 1514 cell 8 avpkt 1000 mpu 64 # tc filter add dev eth0 parent 1:0 prio 5 protocol ip u32
# tc class add dev eth0 parent 1:0 classid 1:1 cbq bandwidth 10MBit rate 10MBit allot 1514 cell 8 weight 1MBit prio 5 maxburst 20 avpkt 1000 bounded # tc class add dev eth0 parent 1:1 classid 1:2 cbq bandwidth 750KBit rate 750KBit avpkt 1000 cell 8 prio 5 allot 1514 weight 75KBit maxburst 21 bounded # tc class add dev eth0 parent 1:2 classid 1:3 cbq bandwidth 750KBit rate 50KBit avpkt 1000 cell 8 prio 5 allot 1514 weight 5KBit maxburst 21
# tc filter add dev eth0 parent 1: prio 5 u32 match ip src 192.168.0.33/32 flowid 1:3
Tilman
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 15 lines · Tilman Giese (Global View)
Quoted 1 line · Stef Coene
Can you post us your tc commands ?
# tc qdisc add dev eth0 root handle 1: cbq bandwidth 10MBit allot 1514 cell 8 avpkt 1000 mpu 64 # tc filter add dev eth0 parent 1:0 prio 5 protocol ip u32# tc class add dev eth0 parent 1:0 classid 1:1 cbq bandwidth 10MBit rate 10MBit allot 1514 cell 8 weight 1MBit prio 5 maxburst 20 avpkt 1000 bounded # tc class add dev eth0 parent 1:1 classid 1:2 cbq bandwidth 750KBit rate 750KBit avpkt 1000 cell 8 prio 5 allot 1514 weight 75KBit maxburst 21 bounded # tc class add dev eth0 parent 1:2 classid 1:3 cbq bandwidth 750KBit rate 50KBit avpkt 1000 cell 8 prio 5 allot 1514 weight 5KBit maxburst 21
Quoted 2 lines
# tc filter add dev eth0 parent 1: prio 5 u32 match ip src 192.168.0.33/32 flowid 1:3
I don't see any error in your scripts. I did some tests myself and this is the result :
http://docum.org/stef.coene/qos/tests/cbq/bounded/bounded.html
I had the same result. The bandwidth you get is a bit more then the configured rate.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 11 lines · Tilman Giese (Global View)
Hi,
I am experiencing a curious phenomenon. I limited the bandwidth for a specific client to 750KBit. It works well despite of the fact that the client always gets a little bit more bandwidth (around 770KBit to 780KBit). I used different bandwidth and traffic measurement tools like ntop, nettimer or ipac. All show the same, a little bit more bandwidth than allowed. The factor by which the specified bandwidth is increased seems to be proportional to the specified bandwidth. But where is the problem. Is it only a different way of traffic measurement or is this a bug? Maybe, does it depend on some command arguments to create the classes?
tc uses 1024 instead of 1000 as factor for kbit (1024^2 for mbit). Usually when talking about network equipment kbit means 1000bit/s and mbit means 1000000bit/s. In your case, 750*24bit/s = 18000bit/s off. The iproute-rates patch at trash.net/~kaber/hfsc is meant to fix this.
Best regards,
Patrick
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/