Skip to contentSkip to conversation

TCC parse error.

LARTC Artūras Šlajus 2 participants 4 messages Dec 9, 2003

lore
Share & tools
lore
#0 lore raw

<stdin>:59: invalid type conversion (expected size in bytes instead of rate) near ")" line 59:
$monika = class ( rate 8kbps, ceil 240kbps, burst 6kBps ) { sfq ( perturb 10sec ); };

any ideas?

Signature · 10 lines
Sincerely, Artūras 'arturaz' Šlajus
You can find me at:
irc.freenode.org: nick arturaz
irc.data.lt: nick arturaz
ICQ: 157929934
Jabber: [email protected]

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#1 lore raw
Quoted 2 lines · Artūras Šlajus

$monika = class ( rate 8kbps, ceil 240kbps, burst 6kBps ) { sfq ( perturb 10sec ); };

Oh, you need to use kB kb or whatever... :/

Signature · 10 lines
Sincerely, Artūras 'arturaz' Šlajus
You can find me at:
irc.freenode.org: nick arturaz
irc.data.lt: nick arturaz
ICQ: 157929934
Jabber: [email protected]

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to Artūras Šlajus

Arturaz,

To me, the error is clearly reported and identified, but perhaps you overlooked it.

: <stdin>:59: invalid type conversion \
: (expected size in bytes instead of rate) near ")"

                      ^^^^^^^^^^^^^^^^^^^^^

: line 59:
: $monika = class ( rate 8kbps, ceil 240kbps, burst 6kBps )
: { sfq ( perturb 10sec ); };

Try this instead:

$monika = class ( rate 8kbps, ceil 240kbps, burst 6kB )

                                           { sfq ( perturb 10sec ); };

burst is a bucket size in bits (b) or bytes (B).

-Martin

Signature · 5 lines
Martin A. Brown --- SecurePipe, Inc. --- [email protected]

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#3 lore raw
In reply to Artūras Šlajus

Arturaz,

: > $monika = class ( rate 8kbps, ceil 240kbps, burst 6kBps ) { sfq ( : > perturb 10sec ); };
: Oh, you need to use kB kb or whatever... :/

Yes. People on this list will be quite happy to help you in a variety of ways. Please do us all a courtesy of reading the error messages and making an effort to read the docs [0] and the LARTC FAQ [1] before sending a message to the list.

Thank you,

-Martin

[0] http://linux-ip.net/gl/tcng/
[1] http://www.docum.org/stef.coene/qos/faq/cache/

Signature · 5 lines
Martin A. Brown --- SecurePipe, Inc. --- [email protected]

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/