traffic control using libpcap
Hi all,
I have to use traffic control sending packets with libpcap. I'm using the following queues:
tc qdisc del dev eth0 root
tc qdisc add dev eth0 root handle 1: htb default 1
tc class add dev eth0 parent 1: classid 1:1 htb rate 75kbps tc class add dev eth0 parent 1: classid 1:2 htb rate 50kbps tc filter add dev eth0 parent 1: protocol ip prio 1 u32 match ip tos 0xA2 0xff classid 1:2
tc filter add dev eth0 parent 1: protocol ip prio 1 u32 match ip tos 0xA8 0xff classid 1:1
If I test such system using udp traffic generator it works but when I send the packets using libpcap the filters don't work and all the traffic is queued via the default class (1:1).
How can I fix such problem?
Thanks
Maurizio Paone
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/