Skip to contentSkip to conversation

How to mark and queue

LARTC Daniel Bergqvist [email protected] 4 participants 4 messages Oct 19, 2000 – Oct 20, 2000

lore
Share & tools
lore

Daniel Bergqvist [email protected]

author
#0 lore raw

<PRE>How do you want the packets be dropped? What do you want to achieve? Which rules will control which packets get dropped?

Regards,
Daniel

&gt;<i> -----Ursprungligt meddelande-----
</I>&gt;<i> Från: <A HREF="mailto:[email protected]">[email protected]</A> </I>&gt;<i> [mailto:<A HREF="mailto:[email protected]">[email protected]</A>]För Josip Gracin </I>&gt;<i> Skickat: Thursday, October 19, 2000 2:06 PM
</I>&gt;<i> Till: bert hubert
</I>&gt;<i> Kopia: <A HREF="mailto:[email protected]">[email protected]</A>
</I>&gt;<i> Ämne: Re: [LARTC] How to mark and queue
</I>&gt;<i>
</I>&gt;<i>
</I>&gt;<i> bert hubert (<A HREF="mailto:[email protected]">[email protected]</A>) wrote:
</I>&gt;<i> &gt; You could also use RED or GRED with strange configuration
</I>&gt;<i> values. RED also
</I>&gt;<i>
</I>&gt;<i> I understand that what you are suggesting would be much better for router
</I>&gt;<i> that handles high volumes of traffic. But, I will be using this for
</I>&gt;<i> simulating a *slow* and congested (WAN) link between several machines so
</I>&gt;<i> there won't be too much traffic and consequently the performance is not an
</I>&gt;<i> issue.
</I>&gt;<i>
</I>&gt;<i> Best regards,
</I>&gt;<i> Josip
</I>&gt;<i>
</I>&gt;<i>
</I>&gt;<i> _______________________________________________
</I>&gt;<i> LARTC mailing list / <A HREF="mailto:[email protected]">[email protected]</A> </I>&gt;<i> <A HREF="http://mailman.ds9a.nl/mailman/listinfo/lartc">http://mailman.ds9a.nl/mailman/listinfo/lartc</A> HOWTO:
</I><A HREF="http://ds9a.nl/2.4Routing/">http://ds9a.nl/2.4Routing/</A>

</PRE>

#1 lore raw

<PRE>Daniel Bergqvist (<A HREF="mailto:[email protected]">[email protected]</A>) wrote:
&gt;<i> How do you want the packets be dropped? What do you want to achieve? Which </I>&gt;<i> rules will control which packets get dropped?
</I>
We have performed some measurements of packet drops on real WAN link. I would like to reproduce the characteristics of (congested) WAN link/router as close as possible. Rules for dropping will not be based on packet contents but on a random variable with certain distribution which in turn depends on parametars such as packet size (e.g. for voice traffic).

Josip

</PRE>

#2 lore raw
In reply to Daniel Bergqvist [email protected]

<PRE>Hi there,
&gt;<i>
</I>&gt;<i> Daniel Bergqvist (<A HREF="mailto:[email protected]">[email protected]</A>) wrote:
</I>&gt;<i> &gt; How do you want the packets be dropped? What do you want to </I>&gt;<i> &gt; achieve? Which
</I>&gt;<i> &gt; rules will control which packets get dropped?
</I>&gt;<i>
</I>&gt;<i> We have performed some measurements of packet drops on real </I>&gt;<i> WAN link. I
</I>&gt;<i> would like to reproduce the characteristics of (congested)
</I>&gt;<i> WAN link/router
</I>&gt;<i> as close as possible. Rules for dropping will not be based on packet </I>&gt;<i> contents but on a random variable with certain distribution </I>&gt;<i> which in turn
</I>&gt;<i> depends on parametars such as packet size (e.g. for voice traffic). </I>
I've been told that for FreeBSD (sorry :-) there is the dummynet-device,
which has been specifically created to do such tests. Maybe this is
off-topic but it could be what you're looking for!

Check <A HREF="http://info.iet.unipi.it/~luigi/ip_dummynet/">http://info.iet.unipi.it/~luigi/ip_dummynet/</A> for details.

Greetings,

Clemens Sibon

</PRE>

#3 lore raw
In reply to Daniel Bergqvist [email protected]

<PRE>Linux has support for such 'fake' interfaces too. I know diald (dial-on-demand-daemon) uses this for detecting and filtering traffic. You might want to check the diald documentation and/or HOWTO for details.
I would like to give more details myself, but unfortunately that's all I know about this :(

Greets, Guy

Clemens Sibon wrote:
&gt;<i>
</I>&gt;<i> Hi there,
</I>&gt;<i> &gt;
</I>&gt;<i> &gt; Daniel Bergqvist (<A HREF="mailto:[email protected]">[email protected]</A>) wrote:
</I>&gt;<i> &gt; &gt; How do you want the packets be dropped? What do you want to
</I>&gt;<i> &gt; &gt; achieve? Which
</I>&gt;<i> &gt; &gt; rules will control which packets get dropped?
</I>&gt;<i> &gt;
</I>&gt;<i> &gt; We have performed some measurements of packet drops on real
</I>&gt;<i> &gt; WAN link. I
</I>&gt;<i> &gt; would like to reproduce the characteristics of (congested)
</I>&gt;<i> &gt; WAN link/router
</I>&gt;<i> &gt; as close as possible. Rules for dropping will not be based on packet
</I>&gt;<i> &gt; contents but on a random variable with certain distribution
</I>&gt;<i> &gt; which in turn
</I>&gt;<i> &gt; depends on parametars such as packet size (e.g. for voice traffic).
</I>&gt;<i>
</I>&gt;<i> I've been told that for FreeBSD (sorry :-) there is the dummynet-device,
</I>&gt;<i> which has been specifically created to do such tests. Maybe this is
</I>&gt;<i> off-topic but it could be what you're looking for!
</I>&gt;<i>
</I>&gt;<i> Check <A HREF="http://info.iet.unipi.it/~luigi/ip_dummynet/">http://info.iet.unipi.it/~luigi/ip_dummynet/</A> for details.
</I>&gt;<i>
</I>&gt;<i> Greetings,
</I>&gt;<i>
</I>&gt;<i> Clemens Sibon
</I>&gt;<i>
</I>&gt;<i> _______________________________________________
</I>&gt;<i> LARTC mailing list / <A HREF="mailto:[email protected]">[email protected]</A>
</I>&gt;<i> <A HREF="http://mailman.ds9a.nl/mailman/listinfo/lartc">http://mailman.ds9a.nl/mailman/listinfo/lartc</A> HOWTO: <A HREF="http://ds9a.nl/2.4Routing/">http://ds9a.nl/2.4Routing/</A> </I>

</PRE>