Skip to contentSkip to conversation

Two routes to Inet no inbound traffic

LARTC [email protected] [email protected] 2 participants 2 messages Dec 17, 2000

lore
Share & tools
lore
#0 lore raw

<PRE>I have a question. I have two dissimilar connections to the internet.
I have DSL and Cable Modem. My domain name is mapped to my
cable modem connection which is eth0. My DSL is on eth1. eth2 is my internal LAN connection.

When I have both routes up, I don't get any of my inbound traffic such as email. I can still get out to the internet fine. Of course there are two default routes but I didn't think that would be a big issue.

I'm running Redhat 7.0 with kernel 2.2.16.

Any ideas?

</PRE>

#1 lore raw

<PRE>On Sat, Dec 16, 2000 at 09:00:40PM -0500, <A HREF="mailto:[email protected]">[email protected]</A> wrote:

&gt;<i> I have DSL and Cable Modem. My domain name is mapped to my </I>&gt;<i> cable modem connection which is eth0. My DSL is on eth1. eth2 </I>&gt;<i> is my internal LAN connection.
</I>&gt;<i>
</I>&gt;<i> When I have both routes up, I don't get any of my inbound traffic </I>&gt;<i> such as email. I can still get out to the internet fine. Of course </I>&gt;<i> there are two default routes but I didn't think that would be a big </I>&gt;<i> issue.
</I>
Use tcpdump or ethereal to find out where your outgoing traffic is going. Check that the traffic appears on the right interface - 'egress filtering' by one of your ISPs may be killing 'martian packets' on your DSL or cable modem.

If that doesn't solve your problem, describe your situation more completely. IP addresses, netmasks, and how your mail is supposed to arrive.

Regards,

bert hubert

Signature · 6 lines
PowerDNS                     Versatile DNS Services  
Trilab                       The Technology People   
'SYN! .. SYN|ACK! .. ACK!' - the mating call of the internet


</PRE>