Skip to contentSkip to conversation

can I do this with cbq?

LARTC Jean-Francois Lemieux [email protected] 3 participants 3 messages Feb 10, 2001 – Feb 11, 2001

lore
Share & tools
lore

Jean-Francois Lemieux [email protected]

author
#0 lore raw

<PRE>you can.

remove bounded from classes definition

--- Krepper Guillermo Billy
&lt;<A HREF="mailto:[email protected]">[email protected]</A>&gt; wrote:
&gt;<i> Hello
</I>&gt;<i>
</I>&gt;<i> I would like to know if I could control traffic with
</I>&gt;<i> some restrictions like
</I>&gt;<i> the folowing:
</I>&gt;<i>
</I>&gt;<i> Supose I have 64kbit that I share with 10 clients.
</I>&gt;<i> Know if 48kbits are used I
</I>&gt;<i> would like to limit each of the 10 usesers lets say
</I>&gt;<i> to 32kbits. If the total
</I>&gt;<i> bandwith is used 64Kbits I would like to limit each
</I>&gt;<i> of the 10 users to
</I>&gt;<i> 8kbits.
</I>&gt;<i>
</I>&gt;<i> can I do something like this or similar ?
</I>&gt;<i>
</I>&gt;<i>
</I>&gt;<i> thanks
</I>&gt;<i>
</I>&gt;<i> billy
</I>&gt;<i>
</I>&gt;<i> _______________________________________________
</I>&gt;<i> LARTC mailing list / <A HREF="mailto:[email protected]">[email protected]</A> </I>&gt;<i> <A HREF="http://mailman.ds9a.nl/mailman/listinfo/lartc">http://mailman.ds9a.nl/mailman/listinfo/lartc</A> HOWTO:
</I><A HREF="http://ds9a.nl/2.4Routing/">http://ds9a.nl/2.4Routing/</A>

==---
Jean-Francois Lemieux
Consultant TI
MCJ Conseil Inc.

__________________________________________________
Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail - only $35
a year! <A HREF="http://personal.mail.yahoo.com/">http://personal.mail.yahoo.com/</A>

</PRE>

#1 lore raw

<PRE>Hello

I would like to know if I could control traffic with some restrictions like the folowing:

Supose I have 64kbit that I share with 10 clients. Know if 48kbits are used I would like to limit each of the 10 usesers lets say to 32kbits. If the total bandwith is used 64Kbits I would like to limit each of the 10 users to 8kbits.

can I do something like this or similar ?

thanks

billy

</PRE>

#2 lore raw
In reply to Jean-Francois Lemieux [email protected]

<PRE>Hi,

&gt;<i> I would like to know if I could control traffic with some restrictions </I>like
&gt;<i> the folowing:
</I>&gt;<i>
</I>&gt;<i> Supose I have 64kbit that I share with 10 clients. Know if 48kbits are </I>used I
&gt;<i> would like to limit each of the 10 usesers lets say to 32kbits. If the </I>total
&gt;<i> bandwith is used 64Kbits I would like to limit each of the 10 users to </I>
&gt;<i> 8kbits.
</I>&gt;<i>
</I>&gt;<i> can I do something like this or similar ?
</I>
I am not sure on what you mean. But if you want to give each of your users equally much bandwidth but still allowing any user to use any unused bandwidth, then you can use wrr from <A HREF="http://wipl-wrr.dkik.dk/wipl-wrr.">http://wipl-wrr.dkik.dk/wipl-wrr.</A>

Christian

</PRE>