u32 filter usage
Hi All,
About u32 usage, as I know the following 3 syntax should be the same:
1. tc filter add ........u32\
match ip protocol 0x6 0xff 2. tc filter add ........u32\
match 00060000 00ff0000 at 93. tc filter add ..........u32\
match u8 6 0xff at 10However, in my platform (Linux2.4.2), only method 1 works. Besides, as I show the filter (tc filter ls dev eth1),
it gives me " match 00060000 00ff0000 at 9", which matches with method 2.
So can any one explain why method 2 and 3 can't work (it shows the message "illegal match") ?
Best Regards
Daniel Lee
e-mail:[email protected]
TEL:(02)2218-1689~33
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/