ppp0/ppp1 ssh
This seems so simple I can't believe it doesn't work yet. I have two modems connected to two ISPs. I route everything through the "fast" one with:
ip route default via xxx.xxx.xxx.xxx dev ppp0
Then to the machine I regularly tf and ssh, I add this:
ip route tf.tf.tf.tf via xxx.xxx.xxx.xxx dev ppp1
ip route ssh.ssh.ssh.ssh via xxx.xxx.xxx.xxx dev ppp1
The reason I joined this list is that I'd rather do something like this, but I can't get it to work right.
ip route add default via xxx.xxx.xxx.xxx dev ppp1 tos 0x10
for i in 22 23 8000; do
iptables -t mangle -A PREROUTING -p tcp
--dport $i -j TOS --set-tos 0x10; doneI would have figured everything for port 22, 23 and 8000 would go out ppp1 and come back ppp1, but I was rather suprised to find that _all_ my traffic goes out ppp0, but the stuff I tagged 0x10 comes back in ppp1?!?
What am I missing?
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
Quoted 18 lines · Jettero Heller
This seems so simple I can't believe it doesn't work yet. I have two modems connected to two ISPs. I route everything through the "fast" one with:
ip route default via xxx.xxx.xxx.xxx dev ppp0Then to the machine I regularly tf and ssh, I add this:
ip route tf.tf.tf.tf via xxx.xxx.xxx.xxx dev ppp1
ip route ssh.ssh.ssh.ssh via xxx.xxx.xxx.xxx dev ppp1The reason I joined this list is that I'd rather do something like this, but I can't get it to work right.
ip route add default via xxx.xxx.xxx.xxx dev ppp1 tos 0x10 for i in 22 23 8000; do iptables -t mangle -A PREROUTING -p tcp --dport $i -j TOS --set-tos 0x10; done
Quoted 4 lines
I would have figured everything for port 22, 23 and 8000 would go out ppp1 and come back ppp1, but I was rather suprised to find that _all_ my traffic goes out ppp0, but the stuff I tagged
0x10comes back in ppp1?!?
Good question. First of all I'm not sure that TOS would influence the routing decision, either on your Linux box or on the routers out there.
The reason that the packets come back on ppp1 is that the source of the IP is set to ppp1 (which is weird, when you're saying that the packets go out on ppp0 to ISP I, are you sure about this?). Then the returning packets which are destined for ppp1 (which belongs to ISP II) will get routed on the Internet to ISP II and will be delivered to PPP1.
Again, if you want to route different services through different ISP's it is called policy routing. Take a look at the documentation on:
Or Arthur's answers to the very same questions on this mailing list.
http://mailman.ds9a.nl/pipermail/lartc/2000q4/000091.html
http://mailman.ds9a.nl/pipermail/lartc/2000q4/000092.html
http://mailman.ds9a.nl/pipermail/lartc/2000q4/000153.html
http://mailman.ds9a.nl/pipermail/lartc/2000q4/000156.html
Ramin
Quoted 6 lines
What am I missing?
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
You should use 'tcpdump -i ppp0' and 'tcpdump -i ppp1' in two different xterms to have a beter understanding as to what (the hell) is going on. Because that light on ppp0 could be your dns lookup or any other unexpected traffic...
Take a look at your routing table (again, with solid commands and no lights here and there ;-)...
Try to traceroute to tf and ssh hosts and see what first hop you see...
Ramin
Quoted 5 lines · Jettero Heller
I'm completely certain. I have lights on both, and made sure my only traffic was my ssh session. The transmit lights flash on ppp0 on the way out, and flash on ppp1 on the way back in. Web traffic only lights up ppp0.
Quoted 56 lines
It's the damn'dest thing I've seen ... I don't even understand how that works. ;)
Quoted 52 lines · Ramin Alidousti
Quoted 18 lines · Jettero Heller
This seems so simple I can't believe it doesn't work yet. I have two modems connected to two ISPs. I route everything through the "fast" one with:
ip route default via xxx.xxx.xxx.xxx dev ppp0Then to the machine I regularly tf and ssh, I add this:
ip route tf.tf.tf.tf via xxx.xxx.xxx.xxx dev ppp1
ip route ssh.ssh.ssh.ssh via xxx.xxx.xxx.xxx dev ppp1The reason I joined this list is that I'd rather do something like this, but I can't get it to work right.
ip route add default via xxx.xxx.xxx.xxx dev ppp1 tos 0x10 for i in 22 23 8000; do iptables -t mangle -A PREROUTING -p tcp --dport $i -j TOS --set-tos 0x10; doneQuoted 4 lines
I would have figured everything for port 22, 23 and 8000 would go out ppp1 and come back ppp1, but I was rather suprised to find that _all_ my traffic goes out ppp0, but the stuff I tagged
0x10comes back in ppp1?!?Good question. First of all I'm not sure that TOS would influence the routing decision, either on your Linux box or on the routers out there.
The reason that the packets come back on ppp1 is that the source of the IP is set to ppp1 (which is weird, when you're saying that the packets go out on ppp0 to ISP I, are you sure about this?). Then the returning packets which are destined for ppp1 (which belongs to ISP II) will get routed on the Internet to ISP II and will be delivered to PPP1.
Again, if you want to route different services through different ISP's it is called policy routing. Take a look at the documentation on:
Or Arthur's answers to the very same questions on this mailing list.
http://mailman.ds9a.nl/pipermail/lartc/2000q4/000091.html
http://mailman.ds9a.nl/pipermail/lartc/2000q4/000092.html
http://mailman.ds9a.nl/pipermail/lartc/2000q4/000153.html
http://mailman.ds9a.nl/pipermail/lartc/2000q4/000156.htmlRamin
Quoted 2 lines
What am I missing?
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/