Skip to contentSkip to conversation

Please i don't understand CBQ at all

LARTC Alexandra Alvarado 2 participants 4 messages May 10, 2001 – May 14, 2001

lore
Share & tools
lore
#1 lore raw

Thanks for answer my question, but...

If i want to be more specific in my ipchains rules, and i want to control the output bandwidth of eth1 card (that means the input traffic of eth0 card), must i make a setup like this?

Internet eth0 (207.87.93.32)|---------| eth1 /--- 10.10.10.0/28
(intranet - PRIVATE addresses)

        --------------------|  LINUX  |-----<HUB>  
        	            |---------| eth1:0   \--- 63.121.156.184/29

(intranet - Voice Service -
PUBLIC (Virtual Interface)

WHAT AM I CONTROLING HERE? OUTGOING OF ETH0?

ipchains -A input i eth1 -s 207.87.93.32 -d 0/0 -j ACCEPT -m 1 ipchains -A input i eth1 -s 10.10.10.0/28 -d 0/0 -j ACCEPT -m 1

tc qdisc add dev eth0 root handle 10: cbq bandwidth 10Mbit avpkt 1000 tc class add dev eth0 parent 10:0 classid 10:1 cbq bandwidth 10Mbit rate
10Mbit allot 1514 weight 1Mbit \ prio 8 maxburst 20 avpkt 1000
tc class add dev eth0 parent 10:1 classid 10:100 cbq bandwidth 10Mbit
rate 64Kbit allot 1514 weight 6Kbit \ prio 5 maxburst 20 avpkt 1000
bounded
tc qdisc add dev eth0 parent 10:100 sfq quantum 1514b perturb 15 tc filter add dev eth0 protocol ip handle 1 fw classid 10:100

WHAT AM I CONTROLING HERE? OUTGOING OF ETH1?

ipchains -A input -i eth0 -d 207.87.93.32 -j ACCEPT -m 2 ipchains -A input -i eth0 -d 10.10.10.0/28 -j ACCEPT -m 2

tc qdisc add dev eth1 root handle 20: cbq bandwidth 10Mbit avpkt 1000 tc class add dev eth1 parent 20:0 classid 20:1 cbq bandwidth 10Mbit rate
10Mbit allot 1514 weight 1Mbit \ prio 8 maxburst 20 avpkt 1000
tc class add dev eth1 parent 20:1 classid 20:100 cbq bandwidth 10Mbit
rate 64Kbit allot 1514 weight 6Kbit \ prio 5 maxburst 20 avpkt 1000
bounded
tc qdisc add dev eth1 parent 20:100 sfq quantum 1514b perturb 15 tc filter add dev eth1 protocol ip handle 2 fw classid 20:100

Thanks

Alexandra

Quoted 22 lines · Stef Coene
Quoted 6 lines · Alexandra Alvarado

Hello,

I need somebody to help me with an example that control incoming packets to 64Kbit and outgoing packets to 64Kbit from external interface of the linux but using ipchains rules.

You can't control incoming bandwidth. For outgoing bandwidth :

- mark the packets witm -m option of ipchains :
ipchains -A output -p tcp -m 1

- use the mark in a filter :
tc filter add $DEV parent 10: protocol ip prio 3 handle 1 fw
classid 10:2

- set up a bounded class 10:2 :
tc qdisc add $DEV root handle 10: cbq bandwidth 10mbit avpkt 1000 tc class add $DEV parent 10:0 classid 10:2 cbq bandwidth 10mbit
rate 64kbit allot 1514 maxburst 20 avpkt 1000 prio 4 isolated bounded

Quoted 5 lines

--

Stef

More QOS info : http://users.belgacom.net/staf/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/

#2 lore raw
In reply to Alexandra Alvarado
Quoted 7 lines · Alexandra Alvarado

Thanks for answer my question, but...

If i want to be more specific in my ipchains rules, and i want to control the output bandwidth of eth1 card (that means the input traffic of eth0 card), must i make a setup like this?

Quoted 8 lines

Internet eth0 (207.87.93.32)|---------| eth1 /--- 10.10.10.0/28
(intranet - PRIVATE addresses)

        --------------------|  LINUX  |-----<HUB>
                            |---------| eth1:0   \--- 63.121.156.184/29

(intranet - Voice Service -
PUBLIC (Virtual Interface)

WHAT AM I CONTROLING HERE? OUTGOING OF ETH0?

Yes, outgoing of eth0 BUT you have the wrong ipchains rules. The first one has as the source 207.87.93.32. It has to be 63.121.156.184/29. And you don't need to add -j ACCEPT.

Quoted 13 lines

ipchains -A input i eth1 -s 207.87.93.32 -d 0/0 -j ACCEPT -m 1 ipchains -A input i eth1 -s 10.10.10.0/28 -d 0/0 -j ACCEPT -m 1

tc qdisc add dev eth0 root handle 10: cbq bandwidth 10Mbit avpkt 1000 tc class add dev eth0 parent 10:0 classid 10:1 cbq bandwidth 10Mbit rate
10Mbit allot 1514 weight 1Mbit \ prio 8 maxburst 20 avpkt 1000
tc class add dev eth0 parent 10:1 classid 10:100 cbq bandwidth 10Mbit
rate 64Kbit allot 1514 weight 6Kbit \ prio 5 maxburst 20 avpkt 1000
bounded
tc qdisc add dev eth0 parent 10:100 sfq quantum 1514b perturb 15 tc filter add dev eth0 protocol ip handle 1 fw classid 10:100

Quoted 1 line

WHAT AM I CONTROLING HERE? OUTGOING OF ETH1?

Same problem, wrong filters. First one is OK, but second one has to be 63.121.156.184/29.

Quoted 4 lines

ipchains -A input -i eth0 -d 207.87.93.32 -j ACCEPT -m 2 ipchains -A input -i eth0 -d 10.10.10.0/28 -j ACCEPT -m 2

Quoted 8 lines

tc qdisc add dev eth1 root handle 20: cbq bandwidth 10Mbit avpkt 1000 tc class add dev eth1 parent 20:0 classid 20:1 cbq bandwidth 10Mbit rate
10Mbit allot 1514 weight 1Mbit \ prio 8 maxburst 20 avpkt 1000
tc class add dev eth1 parent 20:1 classid 20:100 cbq bandwidth 10Mbit
rate 64Kbit allot 1514 weight 6Kbit \ prio 5 maxburst 20 avpkt 1000
bounded
tc qdisc add dev eth1 parent 20:100 sfq quantum 1514b perturb 15 tc filter add dev eth1 protocol ip handle 2 fw classid 20:100

If you want to control ALL outgoing bandwidth on a NIC, you can attach a TBF as the first root qdisc :
tc qdisc add dev eth0 root handle 10: tbf rate 64kbit buffer 20Kb/8
limit 15Kb
tc qdisc add dev eth1 root handle 10: tbf rate 64kbit buffer 20Kb/8
limit 15Kb

Quoted 27 lines

Thanks

Alexandra

Quoted 21 lines · Stef Coene
Quoted 6 lines · Alexandra Alvarado

Hello,

I need somebody to help me with an example that control incoming packets to 64Kbit and outgoing packets to 64Kbit from external interface of the linux but using ipchains rules.

You can't control incoming bandwidth. For outgoing bandwidth :

- mark the packets witm -m option of ipchains :
ipchains -A output -p tcp -m 1

- use the mark in a filter :
tc filter add $DEV parent 10: protocol ip prio 3 handle 1 fw
classid 10:2

- set up a bounded class 10:2 :
tc qdisc add $DEV root handle 10: cbq bandwidth 10mbit avpkt 1000 tc class add $DEV parent 10:0 classid 10:2 cbq bandwidth 10mbit
rate 64kbit allot 1514 maxburst 20 avpkt 1000 prio 4 isolated bounded

Signature · 7 lines
Stef

More QOS info : http://users.belgacom.net/staf/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
#3 lore raw
In reply to Alexandra Alvarado
Quoted 7 lines · Alexandra Alvarado

Thanks for answer my question, but...

If i want to be more specific in my ipchains rules, and i want to control the output bandwidth of eth1 card (that means the input traffic of eth0 card), must i make a setup like this?

Quoted 8 lines

Internet eth0 (207.87.93.32)|---------| eth1 /--- 10.10.10.0/28
(intranet - PRIVATE addresses)

        --------------------|  LINUX  |-----<HUB>
                            |---------| eth1:0   \--- 63.121.156.184/29

(intranet - Voice Service -
PUBLIC (Virtual Interface)

WHAT AM I CONTROLING HERE? OUTGOING OF ETH0?

Yes, outgoing of eth0 BUT you have the wrong ipchains rules. The first one has as the source 207.87.93.32. It has to be 63.121.156.184/29. And you don't need to add -j ACCEPT.

Quoted 13 lines

ipchains -A input i eth1 -s 207.87.93.32 -d 0/0 -j ACCEPT -m 1 ipchains -A input i eth1 -s 10.10.10.0/28 -d 0/0 -j ACCEPT -m 1

tc qdisc add dev eth0 root handle 10: cbq bandwidth 10Mbit avpkt 1000 tc class add dev eth0 parent 10:0 classid 10:1 cbq bandwidth 10Mbit rate
10Mbit allot 1514 weight 1Mbit \ prio 8 maxburst 20 avpkt 1000
tc class add dev eth0 parent 10:1 classid 10:100 cbq bandwidth 10Mbit
rate 64Kbit allot 1514 weight 6Kbit \ prio 5 maxburst 20 avpkt 1000
bounded
tc qdisc add dev eth0 parent 10:100 sfq quantum 1514b perturb 15 tc filter add dev eth0 protocol ip handle 1 fw classid 10:100

Quoted 1 line

WHAT AM I CONTROLING HERE? OUTGOING OF ETH1?

Same problem, wrong filters. First one is OK, but second one has to be 63.121.156.184/29.

Quoted 4 lines

ipchains -A input -i eth0 -d 207.87.93.32 -j ACCEPT -m 2 ipchains -A input -i eth0 -d 10.10.10.0/28 -j ACCEPT -m 2

Quoted 8 lines

tc qdisc add dev eth1 root handle 20: cbq bandwidth 10Mbit avpkt 1000 tc class add dev eth1 parent 20:0 classid 20:1 cbq bandwidth 10Mbit rate
10Mbit allot 1514 weight 1Mbit \ prio 8 maxburst 20 avpkt 1000
tc class add dev eth1 parent 20:1 classid 20:100 cbq bandwidth 10Mbit
rate 64Kbit allot 1514 weight 6Kbit \ prio 5 maxburst 20 avpkt 1000
bounded
tc qdisc add dev eth1 parent 20:100 sfq quantum 1514b perturb 15 tc filter add dev eth1 protocol ip handle 2 fw classid 20:100

If you want to control ALL outgoing bandwidth on a NIC, you can attach a TBF as the first root qdisc :
tc qdisc add dev eth0 root handle 10: tbf rate 64kbit buffer 20Kb/8
limit 15Kb
tc qdisc add dev eth1 root handle 10: tbf rate 64kbit buffer 20Kb/8
limit 15Kb

Quoted 27 lines

Thanks

Alexandra

Quoted 21 lines · Stef Coene
Quoted 6 lines · Alexandra Alvarado

Hello,

I need somebody to help me with an example that control incoming packets to 64Kbit and outgoing packets to 64Kbit from external interface of the linux but using ipchains rules.

You can't control incoming bandwidth. For outgoing bandwidth :

- mark the packets witm -m option of ipchains :
ipchains -A output -p tcp -m 1

- use the mark in a filter :
tc filter add $DEV parent 10: protocol ip prio 3 handle 1 fw
classid 10:2

- set up a bounded class 10:2 :
tc qdisc add $DEV root handle 10: cbq bandwidth 10mbit avpkt 1000 tc class add $DEV parent 10:0 classid 10:2 cbq bandwidth 10mbit
rate 64kbit allot 1514 maxburst 20 avpkt 1000 prio 4 isolated bounded

Signature · 8 lines
Stef

More QOS info : http://users.belgacom.net/staf/


_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/