Skip to contentSkip to conversation

ping can do DS?????

LARTC Juergen 3 participants 4 messages May 18, 2001

lore
Share & tools
lore

Juergen

author
#0 lore raw

Today I try a little function in "ping www.yam.com -Q 40" for DS. And it's workable.
ToS Byte is modify by ping command.
But I thought it's a strange situation.
If that mean that I can use ping for DS high level support???? (Like AF 11) And it can modify DS field by itself, no need for root's promiss???? (I use ping command without root commission)

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/

#1 lore raw
Quoted 7 lines · Juergen

Today I try a little function in "ping www.yam.com -Q 40" for DS. And it's workable.
ToS Byte is modify by ping command.
But I thought it's a strange situation.
If that mean that I can use ping for DS high level support???? (Like AF 11) And it can modify DS field by itself, no need for root's promiss???? (I use ping command without root commission)

I don't have the -Q option for the ping command, what does it doe on your system?

Know that ping uses a special type of IP packets, ICMP. I wouldn't be surprised if the system changes the DS field automaticly.

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/

#2 lore raw
In reply to Juergen

Hi,

Quoted 2 lines

I don't have the -Q option for the ping command, what does it doe on your system?

as far as I can guess he talkes about Alexy's ping clone from the iputils package. It is a enhanced ping with more options, like "-Q".

host_10.0.0.1: ping -help
Usage: ping [-LRUbdfnqrvV] [-c count] [-i interval] [-w wait]
[-p pattern] [-s packetsize] [-t ttl] [-I interface address] [ -T timestamp option ] [ -Q tos ] host

Quoted 2 lines

Know that ping uses a special type of IP packets, ICMP. I wouldn't be surprised if the system changes the DS field automaticly.

Jep, the app sets the DS field (the former TOS field) in the IP header of the ICMP echo request packets to the choosen value (via setsockopt). Quit useful for (diffserv) testing...

host_10.0.0.1: ping -Q 0x1a 10.0.0.2
PING 10.0.0.2 (10.0.0.2) from 10.0.0.1 : 56(84) bytes of data. 64 bytes from 10.0.0.2 (10.0.0.2): icmp_seq=0 ttl$4 timeB.965 msec

host_10.0.0.2>: tcpdump icmp
10.0.0.1 > 10.0.0.2: icmp: echo request (DF) [tos 0x1a,ECT] 10.0.0.2 > 10.0.0.1: icmp: echo reply (DF) [tos 0x1a,ECT]

And, look - it really works. Heureka! :)

Kurt

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/

#3 lore raw
In reply to Juergen

Hi,

Maybe you have seen my question about the "ping -Q"...
I feel strange that -Q is for what goal?????
For DiffServ is useless even it can modify the TOS byte, or it's really for the Router which has DiffServ function???
In my opinion, I think ping is just one time a request and a reply msg. So I am not sure that ping -Q is for the DiffServ or just for comfortable to test DiffServ???

Please give me some advice...thx!!!!

Quoted 33 lines · Kurt Wagner

Hi,

Quoted 2 lines

I don't have the -Q option for the ping command, what does it doe on your system?

as far as I can guess he talkes about Alexy's ping clone from the iputils package. It is a enhanced ping with more options, like "-Q".

host_10.0.0.1: ping -help
Usage: ping [-LRUbdfnqrvV] [-c count] [-i interval] [-w wait]
[-p pattern] [-s packetsize] [-t ttl] [-I interface address] [ -T timestamp option ] [ -Q tos ] host

Quoted 2 lines

Know that ping uses a special type of IP packets, ICMP. I wouldn't be surprised if the system changes the DS field automaticly.

Jep, the app sets the DS field (the former TOS field) in the IP header of the ICMP echo request packets to the choosen value (via setsockopt). Quit useful for (diffserv) testing...

host_10.0.0.1: ping -Q 0x1a 10.0.0.2
PING 10.0.0.2 (10.0.0.2) from 10.0.0.1 : 56(84) bytes of data. 64 bytes from 10.0.0.2 (10.0.0.2): icmp_seq=0 ttl$4 timeB.965 msec

host_10.0.0.2>: tcpdump icmp
10.0.0.1 > 10.0.0.2: icmp: echo request (DF) [tos 0x1a,ECT] 10.0.0.2 > 10.0.0.1: icmp: echo reply (DF) [tos 0x1a,ECT]

And, look - it really works. Heureka! :)

Quoted 7 lines

Kurt

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/