Skip to contentSkip to conversation

Which Qos options should I choose here?

LARTC Geoff . 2 participants 2 messages Jun 1, 2001

lore
Share & tools
lore

Geoff .

author
#0 lore raw

I have a linux box pentium133 running redhat7.0 2.2.18 kernel. I wish to use this as a firewall/masquerading router to share a ppp connection (at first), to two or three pc's via eth0, 192.168.0.x

A few questions hopefully someone can answer.

1) Will u32 filters on dest ip work with masquerading, ie at the output to the individual pc's?

2) Is u32 available in non-iproute2 machines? ( I am unable to compile it)

3) I wish to fairly divide the bandwidth between 2 machines,and have full bandwidth available to either when there is no demand from the other, which is my best option?

cbq with two equal class priorities?
sfq ?

Any suggestions please?
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/

#1 lore raw
Quoted 8 lines · Geoff .

I have a linux box pentium133 running redhat7.0 2.2.18 kernel. I wish to use this as a firewall/masquerading router to share a ppp connection (at first), to two or three pc's via eth0, 192.168.0.x

A few questions hopefully someone can answer.

1) Will u32 filters on dest ip work with masquerading, ie at the output to the individual pc's?

I'm not sure I understand your question, but if you intend to use the filter in order to seperate the traffic to the different PC's. Yes, that can be done.

Quoted 1 line

2) Is u32 available in non-iproute2 machines? ( I am unable to compile it)

Try harder. Compile it elsewhere, What is the exact problem? I even believe RedHat provides binary RPM versions, not sure though.

Quoted 3 lines

3) I wish to fairly divide the bandwidth between 2 machines,and have full bandwidth available to either when there is no demand from the other, which is my best option?

Read the HOWTO. Use seperate classes. You can set equal priorities and rates. Try it.

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/