Skip to contentSkip to conversation

Multiple interfaces thru one qdisc

LARTC Federico Montesino Pouzols 1 participant 1 message Jun 1, 2001

lore
Share & tools
lore
#0 lore raw
Quoted 11 lines · Ethy H. Brito
Quoted 5 lines · MONTESINO POUZOLS FEDERICO

I am not sure, but, perhaps, the teql discipline may be a
solution. With teql you could make a new interface (teql0 or something like that) consisting of the two ppps. Look at the HOWTO, there are some examples of teql, search also through this list archive.

If teql behaves as explained in Linux2.4 Adv HOWTO it is a round-robin device. It would do what I need if all ppp lines go to the same client which is not the case. Could you confirm that it is a simple RR device?

As far as I know (I have read about it, but not tested) it _is_
Round-Robin.

I think that, perhaps, you can impose the queue discipline on
tql0 (that masters both ppps), and then set different routes using ppp0 and ppp1. I wonder if the teql qdisc will shape the ppp0 and ppp1 sending rate. I doubt it.

Please, if there is anybody who knows teql well, confirm this
point. Maybe this behaviour can be changed.

Quoted 5 lines

Ethy H. Brito /"\
InterNexo Ltda. \ / CAMPANHA DA FITA ASCII - CONTRA MAIL HTML
+(12) 341-6860 X ASCII RIBBON CAMPAIGN - AGAINST HTML MAIL
Sao Jose dos Campos / \

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/