Skip to contentSkip to conversation

High Availability and QoS (problem with IP aliasing)

LARTC Javier Miguel Rodriguez 2 participants 2 messages Jun 8, 2001

lore
Share & tools
lore
#0 lore raw

Hello

I am using Ultramonkey to create a highly available firewall linux
cluster. Everything works okay with ipchains or iptables...

The problem is with QoS... Ultramonkey creates a "cluster virtual" IP
address called eth0:0. I am using cbq script to control the bandwith, but it does NOT work with ip-aliasing

Does anybody how to do QoS with an ip-aliased interface?

Thank you in advance

Greetings from Spain!

Signature · 8 lines
Javier Miguel Rodríguez.	(GUFO)                                              
Miembro del grupo Linux de la Facultad de Informática de Sevilla     -o)
http://talika.fie.us.es/linux                                        /\\
Linux Registered User #145051.                                      _\_V

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
#1 lore raw
Quoted 11 lines · Javier Miguel Rodriguez

Hello

I am using Ultramonkey to create a highly available firewall linux
cluster. Everything works okay with ipchains or iptables...

The problem is with QoS... Ultramonkey creates a "cluster virtual" IP
address called eth0:0. I am using cbq script to control the bandwith, but it does NOT work with ip-aliasing

Does anybody how to do QoS with an ip-aliased interface?

Just use the "original" interface, meaning: use eth0 instead of eth0:0. The same is true for iptables rules. I'm also setting up a HA firewall with iptables and traffic shaping; actually one half is running right now (the other half has yet to be set up).

Juri

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/