Some problems with limiting downstream
hi!
I'm trying to control down- and upstream with a 2.4.3 kernel, iptables and tc. I managed to limit the upstream and it works perfect, but somehow my downstream traffic seems not to be affected from traffic controlling. I'm not sure if I missunderstood something or perhaps only mixed up some parameters - I tried several configurations, but it's always the same: the traffic is filtered to the correct class, but there's no limitation. The "strongest" connection can always allocate allmost all downstream traffic.
So here's the setup - perhaps someone can give me a hint?
# DDEV="dev eth0"
# DBAND="bandwidth 768Kbit"
# DOPT="maxburst 20 avpkt 1000"
eth0 is the device to the lan, the average pakte size should be arround 1000 (I got this from some netfilter byte counters) - but I'm not sure about maxburst - I just took ist from the HOWTO - what's that for?
# $TC qdisc add $DDEV root handle 1: cbq bandwidth 100Mbit avpkt 1000 mpu 64
# $TC class add $DDEV parent 1:0 classid 1:1 cbq bandwidth
100Mbit rate 100Mbit allot 1492 weight 10Mbit prio 8 $DOPT
# $TC class add $DDEV parent 1:1 classid 1:2 cbq bandwidth
100Mbit rate 768Kbit allot 1492 weight 77Kbit prio 6 $DOPT bounded
# $TC class add $DDEV parent 1:2 classid 1:3 cbq $DBAND rate
688Kbit allot 1492 weight 70Kbit prio 1 $DOPT
# $TC class add $DDEV parent 1:3 classid 1:100 cbq $DBAND rate
384Kbit allot 1492 weight 38Kbit prio 4 $DOPT
# $TC class add $DDEV parent 1:3 classid 1:200 cbq $DBAND rate
120Kbit allot 1492 weight 12Kbit prio 2 $DOPT
# $TC class add $DDEV parent 1:3 classid 1:300 cbq $DBAND rate
120Kbit allot 1492 weight 12Kbit prio 3 $DOPT
# $TC class add $DDEV parent 1:3 classid 1:400 cbq $DBAND rate
64Kbit allot 1492 weight 12Kbit prio 5 $DOPT
# $TC qdisc add $DDEV parent 1:100 prio
# the same with [1:200, 1:300 and 1:400]
Now tc -s qdisc shows that no pakets have been dropped, there's no overlimit, but for example the 1:300-class got 60M while 1:200 and 1:100 only got 10M traffic per class.
My first thought was, that if I use the full bandwidth there won't be anything to limit, because the classes are always borrowing bandwidth to and from each other - so I changed the rate of class 1:3 to 688Kbit to have 80Kbit "to share" but that also had no effect.
Now I've no more ideas what to change - any ideas?
thanks a lot for your time :)
Sebastian
Signature · 9 lines
Sebastian 'spax' Pape | Your mouse has moved. Windows NT must be mailto: [email protected] | restarted for the change to take effect. pgp: http://p-a-p-e.de/pgp.asc | Reboot now? [ OK ] --- Do you want to know more? http://www.p-a-p-e.de/ --- _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/