Skip to contentSkip to conversation

How many cards....

LARTC Gilberto Braz - NSIS 4 participants 4 messages Jun 19, 2001

lore
Share & tools
lore
#0 lore raw

Thank all for fast help in my question. Anybody use DLINK 570 TX with 4 ports ? It was developed to NT, Does it work with Linux?

Thanks

Gilberto Braz

#1 lore raw

I saw it on lhd.zdnet.com. It seems it does work pretty good with Linux. Take a look right there...

Guy

Quoted 9 lines · Gilberto Braz - NSIS

Thank all for fast help in my question. Anybody use DLINK 570 TX with 4 ports ? It was developed to NT, Does it work with Linux?

Quoted 6 lines

Thanks

Gilberto Braz

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/

#3 lore raw
In reply to Gilberto Braz - NSIS
Quoted 2 lines · Gilberto Braz - NSIS

Thank all for fast help in my question. Anybody use DLINK 570 TX with 4 ports ? It was developed to NT, Does it work with Linux?

we've just built a multi-port ethernet router using three of them, and we've had no problems in the first month of operation. By default, they appear as individual eth ports, and so, in my system, exist as eth1-eth12 (eth0 is the onboard NIC).

You can do more complex stuff, like muxing them together to appear as a single 400Mb/s card, but I'm not qualified to comment on how well that works...

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/