tc errors
Hello,
I have built iproute2-2.2.4-now-ss000305.tar and using it on kernel 2.2.14-5.0.
When I execute:
tc qdisc add dev eth1 root handle 1: prio bands 3 priomap 0 1 2
I get the error message:
RTNETLINK answers: No such file or directory.
What causes this error? Am I missing anything in the kernel?
Somebody please HELP!!!
..Ram
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
Quoted 7 lines · Ramakrishna
tc qdisc add dev eth1 root handle 1: prio bands 3 priomap 0 1 2
I get the error message:
RTNETLINK answers: No such file or directory.
What causes this error? Am I missing anything in the kernel?
Probably. Please check wether you have enabled all QoS parameters in the current kernel.
(This question comes up far to often, and I don't see it immediatly in the HOWTO. Anyone to point me to it or fix it?)
Signature · 8 lines
GnuPG public key: http://www.keyserver.net fingerprint = A3C4 DE50 712D 4FA8 C564 4D96 5E06 C9CC ECFA 19C5 _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
I have enabled all the QoS features (except Special RSVP classifier for IPv6)
Moreover, I had read in the archives that the advanced router options need to be enabled. I have also enabled all of them.
Any suggestions?
..Ram
-----Original Message-----
From: Wingtung.Leung [mailto:[email protected]]
Sent: Thursday, June 28, 2001 3:05 PM
To: Linux Advanced Router & Traffic Control
Subject: Re: [LARTC] tc errors
Quoted 7 lines · Ramakrishna
tc qdisc add dev eth1 root handle 1: prio bands 3 priomap 0 1 2
I get the error message:
RTNETLINK answers: No such file or directory.
What causes this error? Am I missing anything in the kernel?
Probably. Please check wether you have enabled all QoS parameters in the current kernel.
(This question comes up far to often, and I don't see it immediatly in the HOWTO. Anyone to point me to it or fix it?)
Signature · 13 lines
GnuPG public key: http://www.keyserver.net fingerprint = A3C4 DE50 712D 4FA8 C564 4D96 5E06 C9CC ECFA 19C5 _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/ _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
Quoted 4 lines · Ramakrishna
I have enabled all the QoS features (except Special RSVP classifier for IPv6)
Moreover, I had read in the archives that the advanced router options need to be enabled. I have also enabled all of them.
(Please type your text beneath the quote, it makes messages more readable.)
Your command works fine here, I only had the change the eth1 parameter to eth0. What kernel version are you using? Can you cut and paste the "QoS and queueing" section from the kernel config file?
Can you use other tc commands for creating a simple root class, like:
tc qdisc add dev eth0 root handle 1: cbq bandwidth 100Mbit allot 1514 \
avpkt 1023
Signature · 8 lines
GnuPG public key: http://www.keyserver.net fingerprint = A3C4 DE50 712D 4FA8 C564 4D96 5E06 C9CC ECFA 19C5 _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
Quoted 7 lines · Ramakrishna
I have enabled all the QoS features (except Special RSVP classifier for IPv6)
Moreover, I had read in the archives that the advanced router options need to be enabled. I have also enabled all of them.Any suggestions?
are you sure eth1 is the correct interface?
Nikolai
Quoted 29 lines
..Ram
-----Original Message-----
From: Wingtung.Leung [mailto:[email protected]]
Sent: Thursday, June 28, 2001 3:05 PM
To: Linux Advanced Router & Traffic Control
Subject: Re: [LARTC] tc errorsQuoted 7 lines · Ramakrishna
tc qdisc add dev eth1 root handle 1: prio bands 3 priomap 0 1 2
I get the error message:
RTNETLINK answers: No such file or directory.
What causes this error? Am I missing anything in the kernel?
Probably. Please check wether you have enabled all QoS parameters in the current kernel.
(This question comes up far to often, and I don't see it immediatly in the HOWTO. Anyone to point me to it or fix it?)
--
GnuPG public key: http://www.keyserver.net
fingerprint = A3C4 DE50 712D 4FA8 C564 4D96 5E06 C9CC ECFA 19C5
Quoted 8 lines
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO:
http://ds9a.nl/2.4Routing/_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
-----Original Message-----
From: Wingtung.Leung [mailto:[email protected]]
Sent: Thursday, June 28, 2001 3:53 PM
To: Linux Advanced Router & Traffic Control
Subject: RE: [LARTC] tc errors
Quoted 11 lines
I have enabled all the QoS features (except Special RSVP classifier for IPv6)
Moreover, I had read in the archives that the advanced router options need to be enabled. I have also enabled all of them.(Please type your text beneath the quote, it makes messages more readable.)
Your command works fine here, I only had the change the eth1 parameter to eth0. What kernel version are you using? Can you cut and paste the "QoS and queueing" section from the kernel config file?
The config file has the following QoS and Queuing definitions: # # QoS and/or fair queueing # CONFIG_NET_SCHED=y CONFIG_NETLINK=y CONFIG_RTNETLINK=y CONFIG_NET_SCH_CBQ=y CONFIG_NET_SCH_CSZ=y CONFIG_NET_SCH_PRIO=y CONFIG_NET_SCH_RED=y CONFIG_NET_SCH_SFQ=y CONFIG_NET_SCH_TEQL=y CONFIG_NET_SCH_TBF=y CONFIG_NET_QOS=y CONFIG_NET_ESTIMATOR=y CONFIG_NET_CLS=y CONFIG_NET_CLS_ROUTE4=y CONFIG_NET_CLS_ROUTE=y CONFIG_NET_CLS_FW=y CONFIG_NET_CLS_U32=y CONFIG_NET_CLS_RSVP=y # CONFIG_NET_CLS_RSVP6 is not set CONFIG_NET_CLS_POLICE=y
Quoted 4 lines
Can you use other tc commands for creating a simple root class, like:
tc qdisc add dev eth0 root handle 1: cbq bandwidth 100Mbit allot 1514 \
avpkt 1023
This command did not give an error.
Also, Nikolai, eth1 is a valid interface on the device I am using.
..Ram
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/