Mark with Iptables
Hey
I've been playing with bandwidth sharing and the best solution seems to be a mix of iptables and CBQ but I seem to be in trouble already. I've choosen to mark al traffic from my LAN going to the internet (upload) as according to the following command which seems to work:
iptables -A PREROUTING -t mangle -i eth0 -p tcp -d ! 192.168.0.0/24 -j MARK --set-mark 1
But how do I mark the data that's being transferred through the masquaraded connection (download) established by the computers on the LAN?
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
Quoted 8 lines · Kovarththanan Rajaratnam
Hey
I've been playing with bandwidth sharing and the best solution seems to be a mix of iptables and CBQ but I seem to be in trouble already. I've choosen to mark al traffic from my LAN going to the internet (upload) as according to the following command which seems to work:
Quoted 5 lines
iptables -A PREROUTING -t mangle -i eth0 -p tcp -d ! 192.168.0.0/24 -j MARK --set-mark 1
But how do I mark the data that's being transferred through the masquaraded connection (download) established by the computers on the LAN?
You can mark the packets in the forward chain, so they are allready demasqueraded. I think that will work, but I didn't tried it.
Stef
Signature · 6 lines
[email protected] [email protected] More QOS info : http://users.belgacom.net/staf/ _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
Quoted 8 lines · Kovarththanan Rajaratnam
Hey
I've been playing with bandwidth sharing and the best solution seems to be a mix of iptables and CBQ but I seem to be in trouble already. I've choosen to mark al traffic from my LAN going to the internet (upload) as according to the following command which seems to work:
Quoted 5 lines
iptables -A PREROUTING -t mangle -i eth0 -p tcp -d ! 192.168.0.0/24 -j MARK --set-mark 1
But how do I mark the data that's being transferred through the masquaraded connection (download) established by the computers on the LAN?
You can mark the packets in the forward chain, so they are allready demasqueraded. I think that will work, but I didn't tried it.
Stef
Signature · 7 lines
[email protected] [email protected] More QOS info : http://users.belgacom.net/staf/ _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/