Skip to contentSkip to conversation

Prioritizing streams

LARTC Michael T. Babcock 2 participants 2 messages Jul 12, 2001 – Jul 13, 2001

lore
Share & tools
lore
#0 lore raw

I have two servers on a network that need to intercommunicate a lot (file sharing and authentication information). I'd like to prioritise that traffic on them from their other network traffic, but I don't want to think in terms of necessarily fixing bandwidths; I just want the inter-server communication to go out first if there's a backlog.

I could decide, I guess, what the minimum level of service for other client machines is (say, 5Mbit) and set up two queues -- both unbounded -- one for inter-server, one for clients, but with a higher priority on the server queue. Would this work as I expect it to?

Signature · 8 lines
Michael T. Babcock
CTO, FibreSpeed



_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
#1 lore raw
Quoted 7 lines · Michael T. Babcock

I have two servers on a network that need to intercommunicate a lot (file sharing and authentication information). I'd like to prioritise that traffic on them from their other network traffic, but I don't want to think in terms of necessarily fixing bandwidths; I just want the inter-server communication to go out first if there's a backlog.

try PRIO qdisc, but it is tricky, you will note it when the link goes to its limit only.

Nikolai

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/