2.2 vs 2.4 for TC
Hi,
A while ago I saw a message saying that the TC features in 2.2 aren't very mature, and I'm wondering what I'd be missing out on if I stayed with 2.2 instead of using 2.4 now.
I'm quite familiar with ipchians, and advanced routing on 2.2. I don't plan on doing any layer 2 based rules, so that's not an issue.
TIA,
Mike
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
Quoted 6 lines · Mike Fedyk
Hi,
A while ago I saw a message saying that the TC features in 2.2 aren't very mature, and I'm wondering what I'd be missing out on if I stayed with 2.2 instead of using 2.4 now.
download 2.4.6
download 2.2.lastest
make a diff on net/sched directory and see the difference. You would miss like 2000 lines of bugfixes if you stay with 2.2, but anyway 2.4.6 is not yet stable with "tc features", so if it works for you dont move it until 2.4.15 or so ...
Nikolai
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
Quoted 8 lines · Nikolai Vladychevski
Quoted 6 lines · Mike Fedyk
Hi,
A while ago I saw a message saying that the TC features in 2.2 aren't very mature, and I'm wondering what I'd be missing out on if I stayed with 2.2 instead of using 2.4 now.
Quoted 7 lines
download 2.4.6
download 2.2.lastestmake a diff on net/sched directory and see the difference. You would miss like 2000 lines of bugfixes if you stay with 2.2, but anyway 2.4.6 is not yet stable with "tc features", so if it works for you dont move it until 2.4.15 or so ...
Are you saying that the QoS traffic control features have stability problems, or is this just general 2.4 instability?
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
Quoted 13 lines · Mike Fedyk
Quoted 11 lines · Nikolai Vladychevski
Quoted 6 lines · Mike Fedyk
Hi,
A while ago I saw a message saying that the TC features in 2.2 aren't very mature, and I'm wondering what I'd be missing out on if I stayed with 2.2 instead of using 2.4 now.
download 2.4.6
download 2.2.lastest
Quoted 7 lines
Quoted 4 lines
make a diff on net/sched directory and see the difference. You would miss like 2000 lines of bugfixes if you stay with 2.2, but anyway 2.4.6 is not yet stable with "tc features", so if it works for you dont move it until 2.4.15 or so ...
Are you saying that the QoS traffic control features have stability problems, or is this just general 2.4 instability?
what I have listened and what my friends say general 2.4 is not very stable. What I have seen myself is that 2.4 works ok for me, but since the change logs for 2.4.x are full of "network update" stuff, i still not very sure it is stable.
About QoS traffic .... I just had posted about some problems in CBQ code, even if I had incorretly set it up, it shouldn't freeze kernel, so , as long as you understand it well and use the tc command correctly, it will work for you. But what I am trying to do is to release it for production where the end users would point & click for filter creation & bandwidth definition, so I think it will be an adventure, but I am accepting the risks... after all.... it's free code....
Regards
Nikolai
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/