TC Point & Click + XML
Quoted 4 lines · Nikolai Vladychevski
But what I am trying to do is to release it for
production where the end users would point & click for filter creation & bandwidth definition, so I think it will be an adventure, but I am accepting the risks... after all.... it's free code....
I've been working on an XML format for describing a traffic control configuration in-house. We're working on a good way to describe the rules and its not too hard since most of the settings are hierarchial. We've eliminated the need for specifying parents by the inherentness of nesting classes under cbq queues and queues under classes, but have a few more things to iron out. I'll be posting what we come up with and some code to turn it into TC statements when its more stable unless there's outside interest in working on it.
Offering users a point-and-click QoS+TC environment was on our minds when we realised that what we needed was a good configuration file format to save the settings in.
Signature · 6 lines
Michael T. Babcock http://www.fibrespeed.net/~mbabcock/ _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
This would be wonderful... is it an OS project (And how far along is it)? It always seemd to me that things like routing and rate limiting rules would be better described by a configuration file than by a series of command line commands.
-David Talbot
Quoted 21 lines · Michael T. Babcock
Quoted 5 lines · Nikolai Vladychevski
But what I am trying to do is to release it for
production where the end users would point & click for filter creation & bandwidth definition, so I think it will be an adventure, but I am accepting the risks... after all.... it's free code....I've been working on an XML format for describing a traffic control configuration in-house. We're working on a good way to describe the rules and its not too hard since most of the settings are hierarchial. We've eliminated the need for specifying parents by the inherentness of nesting classes under cbq queues and queues under classes, but have a few more things to iron out. I'll be posting what we come up with and some code to turn it into TC statements when its more stable unless there's outside interest in working on it.
Offering users a point-and-click QoS+TC environment was on our minds when we realised that what we needed was a good configuration file format to save the settings in.
Quoted 4 lines
This would be wonderful... is it an OS project (And how far along is it)? It always seemd to me that things like routing and rate limiting rules would be better described by a configuration file than by a series of command line commands.
A copy of an example XML description file is available at:
http://www.fibrespeed.net/~mbabcock/linux/qos_tc/tc.xml
Right now, its fairly specific to the options available in Linux tc, but our goal was to come up with a schema that would be extendable to other QoS configurations (like *BSD's)
Signature · 7 lines
Michael T. Babcock CTO, FibreSpeed _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
Quoted 10 lines · Michael T. Babcock;
Quoted 4 lines
This would be wonderful... is it an OS project (And how far along is it)? It always seemd to me that things like routing and rate limiting rules would be better described by a configuration file than by a series of command line commands.
A copy of an example XML description file is available at:
http://www.fibrespeed.net/~mbabcock/linux/qos_tc/tc.xml
Right now, its fairly specific to the options available in Linux tc, but our goal was to come up with a schema that would be extendable to other QoS configurations (like *BSD's)
This is what I am getting
XML Parsing Error: syntax error Location:
http://www.fibrespeed.net/~mbabcock/linux/qos_tc/tc.xml Line Number 1, Column 6:<?xml ?>
Signature · 6 lines
Togan Muftuoglu _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
Any source code available (and if so where?)? Is this a OS project, an internal app, or a commercial app?
-David Talbot
Quoted 8 lines · Michael T. Babcock
Quoted 2 lines
This would be wonderful... is it an OS project (And how far along is it)? It always seemd to me that things like routing and rate limiting rules would be better described by a configuration file than by a series of command line commands.
A copy of an example XML description file is available at:
http://www.fibrespeed.net/~mbabcock/linux/qos_tc/tc.xml
Right now, its fairly specific to the options available in Linux tc, but our goal was to come up with a schema that would be extendable to other QoS configurations (like *BSD's)
Quoted 1 line
Any source code available (and if so where?)?
Not in the open yet, no.
Quoted 1 line
Is this a OS project, an internal app, or a commercial app?
Open source, for commercial use. We want to be able to design traffic control
configurations for our clients in a better way than the lists of TC commands that
are typical -- so this will obviously give us commercial aid, but we will release
the conversion tools under the GPL and the XML schema for free use. I'd like to officially encourage contribution to the idea and any syntactic problems
you foresee.
--
Michael T. Babcock
CTO, FibreSpeed
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
A schema that doesn't use the obscure referances of tc would probably be far easier to use, something similar to:
<qos>
<class id="1:1" devicebandwidth="100mbit" ratelimit="256kbit"
device="eth0" bounded>
<filter srcip="192.168.0.1" destination="209.12.12.12"
destinationport="80"/>
<filter destinationip="10.0.0.1">
<route redirectto="10.0.1.1" redirectport="80"/>
</filter>
</class>
<filter destinationip="10.0.0.1">
<route redirectto="10.0.1.1" redirectport="443"/>
</filter><qos>
This is logically the way I've always thought of tc/iptables etc (It makes sense to me that you would want to configure them both in the same file. Basically using the syntax above, you define a class, then you define filters to say when it should apply, and you can even set routing decisions (iptables) when certain filters apply. It seems like it wouldn't be hard to put together a perl script that could interpret the above and wisk it into a series of iptables and tc commands that produce the desired configuration.
Of course the example above means alot of things are implied such as the average packet size and many of the other parts of TC that are "unknown" (such as quantum, I still can't find and documentation as to what It does, I just know it has to be 1514b). In cases such as the one mentioned above, we could create "semi-intelligent defaults" but with the ability for the person to define it if they really want to.
What do you think? Too dummied down to be useful?
-David Talbot
Quoted 27 lines · Michael T. Babcock
Quoted 2 lines
Any source code available (and if so where?)?
Not in the open yet, no.
Quoted 2 lines
Is this a OS project, an internal app, or a commercial app?
Open source, for commercial use. We want to be able to design traffic control
configurations for our clients in a better way than the lists of TC commands that
are typical -- so this will obviously give us commercial aid, but we will release
the conversion tools under the GPL and the XML schema for free use. I'd like to officially encourage contribution to the idea and any syntactic problems
you foresee.
--
Michael T. Babcock
CTO, FibreSpeed_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/.
Quoted 3 lines · David Talbot
This is logically the way I've always thought of tc/iptables etc (It makes sense to me that you would want to configure them both in the same file).
On a Linux machine -- yes. However, doing XML schemas correctly means that it should describe one thing well, and only that one thing. I'd rather have an extensible schema that describes traffic control rules perfectly than one that also describes routing and filtering half-heartedly.
Quoted 6 lines
Of course the example above means alot of things are implied such as the average packet size and many of the other parts of TC that are "unknown" (such as quantum, I still can't find and documentation as to what It does, I just know it has to be 1514b). In cases such as the one mentioned above, we could create "semi-intelligent defaults" but with the ability for the person to define it if they really want to.
Quantum is the unit of an individual packet and should be set to the MTU
+ the ethernet header size (14 bytes).
Signature · 9 lines
Michael T. Babcock CTO, FibreSpeed _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/