egate USB support

DISCUSSION Dersim (Sim) Ahmad 2 participants 2 messages Jan 16, 2003

Share & tools

Dersim (Sim) Ahmad

author

2003-01-16 07:18 UTC #0 lore raw

Hi all,
I'm running a Red Hat Linux 7.2, Kernel 2.4.7-10, i'm a newbie
at this, and so when i plug in my USB device in is there supposed to be somekind of a GUI coming up telling me that it available to be used?, 'cause i ran some code and i'm not sure if my device is actually working or not, if someone could let me know that would be fantastic.[root@asia init.d]# ./hotplug status
PCI Status for kernel: Linux 2.4.7-10 i686

PCI up; bus count is 2
00:00.0 Host bridge: Intel Corporation 440LX/EX - 82443LX/EX Host bridge (rev 03)
00:01.0 PCI bridge: Intel Corporation 440LX/EX - 82443LX/EX AGP bridge (rev 03)
00:0e.0 Multimedia audio controller: Trident Microsystems 4DWave DX (rev 02) 00:0f.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30)
00:14.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02) 00:14.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01) 00:14.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01) 00:14.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02) 01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G100 [Productiva] AGP (rev 02)

USB Status for kernel: Linux 2.4.7-10 i686

USB up; bus count is 1

T:  Bus Lev Prnt Port Cnt Dev#=  1 Spd  MxCh= 2
P:  Vendor00 ProdID00 Rev= 0.00
S:  Product=USB UHCI Root Hub
S:  SerialNumber80
I:  If#= 0 Alt= 0 #EPs= 1 Cls	(hub  ) Sub Prot Driver=hub
T:  Bus Lev Prnt Port Cnt Dev#=  2 Spd=1.5 MxCh= 0
P:  Vendor	73 ProdID01 Rev= 1.00
S:  Manufacturer=SchlumbergerSema
S:  Product=SchlumbergerSema Cryptoflex e-gate
I:  If#= 0 Alt= 0 #EPs= 0 Cls(>ifc ) Sub Prot Driver=(none)

USB Drivers Loaded:
usbdevfs
hub

khubd/hotplug thread:

  F S   UID   PID  PPID  C PRI  NI ADDR    SZ WCHAN  TTY          TIME CMD
040 S     0  3196     1  0  69   0    -     0 end    pts/3    00:00:00 khubd

Module Size Used by

usb-uhci               21536   0  (unused)
usbcore                51712   1  [usb-uhci]
ide-cd                 27072   0  (autoclean)
cdrom                  28512   0  (autoclean) [ide-cd]
trident                26512   0  (autoclean)
ac97_codec              8832   0  (autoclean) [trident]
soundcore               4464   2  (autoclean) [trident]
binfmt_misc             6416   1
autofs                 11520   0  (autoclean) (unused)
3c59x                  26336   1
ipchains               39200   0
ext3                   64624   2
jbd                    40992   2  [ext3]

[root@asia init.d]#

Thanks in advance.

Sim

-------------------------------------------------------
This SF.NET email is sponsored by: A Thawte Code Signing Certificate is essential in establishing user confidence by providing assurance of authenticity and code integrity. Download our Free Code Signing guide:
http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0028en
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel

Brad Hards

2003-01-16 07:31 UTC #1 lore raw

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Quoted 5 lines · Dersim (Sim) Ahmad

T:  Bus Lev Prnt Port Cnt Dev#=  2 Spd=1.5 MxCh= 0
P:  Vendor	73 ProdID01 Rev= 1.00
S:  Manufacturer=SchlumbergerSema
S:  Product=SchlumbergerSema Cryptoflex e-gate
I:  If#= 0 Alt= 0 #EPs= 0 Cls(>ifc ) Sub Prot Driver=(none)

Your device is detected, but you have no driver loaded. Try the Muscle project for drivers for this type of product:
http://www.linuxnet.com/sourcedrivers.html

Also, you probably want to upgrade from such an obsolete kernel.

Brad
- --
http://linux.conf.au. 22-25Jan2003. Perth, Aust. I'm registered. Are you? -----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.6 (GNU/Linux)
Comment: For info see http://www.gnupg.org

iD8DBQE+Jl/JW6pHgIdAuOMRAg7MAJ9DUeP3znk2Sd4D4IRBzeGl6KbIcgCdEZWn aEPTvkknI9fbrGMhjyopPkw=sZWF
-----END PGP SIGNATURE-----