USB CANYON Flashdisk!
Hi!
I have a little problam with my flash disk.
Im using kernel2.4.23 with all USB support compiled as modules, and the SCSI suport and emaultaion for disk and cdrom.
I also installed the hotplug the debian way.
The problem i have is that my flash disk works if it is connected at the boot, but when i unplug it i get this in my /var/log/messages
Dec 25 12:01:12 Mintaka kernel: usb.c: USB disconnect on device 00:1d.0-1 address 2 Dec 25 12:01:12 Mintaka kernel: usb.c: USB
disconnect on device 00:1d.0-1.1 address 3
Which i think is ok. Then i plug the flashdisk again in but nothing realy happens. No device is recognised, and i cant mount it.
Im realy out of any ideas what could be wrong. So any help is wellcome!
THX
Jure
-------------------------------------------------------
This SF.net email is sponsored by: IBM Linux Tutorials. Become an expert in LINUX or just sharpen your skills. Sign up for IBM's Free Linux Tutorials. Learn everything from the bash shell to sys admin. Click now! http://ads.osdn.com/?ad_id78&alloc_id371&op=click
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
Quoted 13 lines · Jure Zakrajsek
Hi!
I have a little problam with my flash disk.
Im using kernel2.4.23 with all USB support compiled as modules, and the SCSI suport and emaultaion for disk and cdrom.I also installed the hotplug the debian way.
The problem i have is that my flash disk works if it is connected at the boot, but when i unplug it i get this in my
/var/log/messagesDec 25 12:01:12 Mintaka kernel: usb.c: USB disconnect on device 00:1d.0-1 address 2 Dec 25 12:01:12 Mintaka kernel: usb.c: USB
Quoted 6 lines
disconnect on device 00:1d.0-1.1 address 3
Which i think is ok. Then i plug the flashdisk again in but nothing realy happens. No device is recognised, and i cant mount it.
Im realy out of any ideas what could be wrong. So any help is wellcome!
Please read the linux usb guide at http://www.linux-usb.org If you still have questions, read the FAQ there, and post the info requested there to the linux-usb-users mailing list.
Good luck,
greg k-h
-------------------------------------------------------
This SF.net email is sponsored by: IBM Linux Tutorials. Become an expert in LINUX or just sharpen your skills. Sign up for IBM's Free Linux Tutorials. Learn everything from the bash shell to sys admin. Click now! http://ads.osdn.com/?ad_id78&alloc_id371&op=click
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
Quoted 13 lines · Jure Zakrajsek
Hi!
I have a little problam with my flash disk.
Im using kernel2.4.23 with all USB support compiled as modules, and the SCSI suport and emaultaion for disk and cdrom.I also installed the hotplug the debian way.
The problem i have is that my flash disk works if it is connected at the boot, but when i unplug it i get this in my
/var/log/messagesDec 25 12:01:12 Mintaka kernel: usb.c: USB disconnect on device 00:1d.0-1 address 2 Dec 25 12:01:12 Mintaka kernel: usb.c: USB
Quoted 6 lines
disconnect on device 00:1d.0-1.1 address 3
Which i think is ok. Then i plug the flashdisk again in but nothing realy happens. No device is recognised, and i cant mount it.
Im realy out of any ideas what could be wrong. So any help is wellcome!
Please read the linux usb guide at http://www.linux-usb.org If you still have questions, read the FAQ there, and post the info requested there to the linux-usb-users mailing list.
Good luck,
greg k-h
-------------------------------------------------------
This SF.net email is sponsored by: IBM Linux Tutorials. Become an expert in LINUX or just sharpen your skills. Sign up for IBM's Free Linux Tutorials. Learn everything from the bash shell to sys admin. Click now! http://ads.osdn.com/?ad_id78&alloc_id371&op=click
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
Quoted 13 lines · Jure Zakrajsek
Hi!
I have a little problam with my flash disk.
Im using kernel2.4.23 with all USB support compiled as modules, and the SCSI suport and emaultaion for disk and cdrom.I also installed the hotplug the debian way.
The problem i have is that my flash disk works if it is connected at the boot, but when i unplug it i get this in my
/var/log/messagesDec 25 12:01:12 Mintaka kernel: usb.c: USB disconnect on device 00:1d.0-1 address 2 Dec 25 12:01:12 Mintaka kernel: usb.c: USB
Quoted 6 lines
disconnect on device 00:1d.0-1.1 address 3
Which i think is ok. Then i plug the flashdisk again in but nothing realy happens. No device is recognised, and i cant mount it.
Im realy out of any ideas what could be wrong. So any help is wellcome!
Please read the linux usb guide at http://www.linux-usb.org If you still have questions, read the FAQ there, and post the info requested there to the linux-usb-users mailing list.
Good luck,
greg k-h
-------------------------------------------------------
This SF.net email is sponsored by: IBM Linux Tutorials. Become an expert in LINUX or just sharpen your skills. Sign up for IBM's Free Linux Tutorials. Learn everything from the bash shell to sys admin. Click now! http://ads.osdn.com/?ad_id78&alloc_id371&op=click
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel