Why isn't aic7xxx showing up in the pcimodules list?

I have an Adaptec AHA-2930CU in my machine. I boot from a drive on my AMD-756 IDE interface. I built aic7xxx support as a module and have all the latest hotplug script stuff installed, including the patched pcimodules.

pcimodules reports:

	emu10k1
	3c59x
	usb-ohci

And each of these drivers get loaded fine at boot time by pci.rc.

I am wondering why aic7xxx isn't showing up. Obviously, the hotplug system isn't setting up the scsi interface for me.

Miles

_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
[email protected]
http://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel

No MODULE_DEVICE_TABLE in the module.

Bill

_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
[email protected]
http://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel

I believe that the "new" Adaptec-sponsored aic7xxx driver should work with hotplug. I don't think this is in the 2.4 tree yet.

-- Dave

_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
[email protected]
http://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel