Skip to contentSkip to conversation

booting? or is this list dead? ;-)

Linux-ia64 Tim Riker 3 participants 7 messages Feb 8, 2000

lore
Share & tools
lore

Tim Riker

author
#0 lore raw

What is the eli command to mount the CD as / and boot?

Signature · 3 lines
Tim Riker - http://rikers.org/ - short SIGs! <g>
All I need to know I could have learned in Kindergarten
... if I'd just been paying attention.
#1 lore raw

It will depend on your system configuration... if all you have on IDE is the ls120 and CD, then I think the CD would be /dev/hdc so you should be able to use
"eli <vmlinux> root=/dev/hdc"

Quoted 12 lines · Tim Riker

What is the eli command to mount the CD as / and boot?

Signature · 9 lines
Tim Riker - http://rikers.org/ - short SIGs! <g>
All I need to know I could have learned in Kindergarten
... if I'd just been paying attention.


_______________________________________________
Linux-ia64 mailing list
[email protected]
http://lists.linuxia64.org/lists/listinfo/linux-ia64
#2 lore raw
In reply to Tim Riker
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line · Goutham Rao

Goutham> It will depend on your system configuration... if all you Goutham> have on IDE is the ls120 and CD, then I think the CD would Goutham> be /dev/hdc so you should be able to use "eli <vmlinux> Goutham> root=/dev/hdc"

Don't forget to specify the "rescue" option---otherwise, the boot will get stuck halfway through. Unfortunately, I wasn't able to document this option in README.IA-64 because I didn't know if the CD-ROM is actually bootable until we had the master (and then it was too late to update the README and make a new master...).

	--david
author
#3 lore raw
In reply to Tim Riker

Note: I can't seem to reach MX hpl.hp.com from here?

ahhh rescue. Didn't think of that one.

Doesn't the included CD read CD-RW, or at least CD-R? Couln't you have tested with one of those? That's what we do here and then we ship the CD-R to mastering.

Also /etc/fstab has /dev/hdc1 in it. ;-( should just be /dev/hdc

Quoted 20 lines · David Mosberger
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines · Goutham Rao

Goutham> It will depend on your system configuration... if all you Goutham> have on IDE is the ls120 and CD, then I think the CD would Goutham> be /dev/hdc so you should be able to use "eli <vmlinux> Goutham> root=/dev/hdc"

Don't forget to specify the "rescue" option---otherwise, the boot will get stuck halfway through. Unfortunately, I wasn't able to document this option in README.IA-64 because I didn't know if the CD-ROM is actually bootable until we had the master (and then it was too late to update the README and make a new master...).

        --david

_______________________________________________
Linux-ia64 mailing list
[email protected]
http://lists.linuxia64.org/lists/listinfo/linux-ia64

Signature · 3 lines
Tim Riker - http://rikers.org/ - short SIGs! <g>
All I need to know I could have learned in Kindergarten
... if I'd just been paying attention.
#4 lore raw
In reply to Tim Riker
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line · Tim Riker

Tim> Doesn't the included CD read CD-RW, or at least CD-R? Couln't Tim> you have tested with one of those? That's what we do here and Tim> then we ship the CD-R to mastering.

<RANT>

Gee, could just _someone_ at least consider saying thanks for having a bootable CD in the first place?

I'm getting a little tired of hearing all sorts of complaints about not having a perfect CD. If I hadn't worked all night Thursday/Friday before LWE and Mike Balma and Lorraine Bartlett hadn't pulled all kinds of strings at HP with the CD manufacturing, we would not have a CD at all and you'd be struggling with boot floppies instead.

</RANT>.

Wow, I feel so much better now. ;-)

	--david
author
#5 lore raw
In reply to Tim Riker

Whimper....

Thank you, thank you, thank you! for putting together this CD! This is a huge step forward! I didn't mean to be ungrateful at all, I was just making suggestions. I am VERY pleased with the CD. I am also willing to help in any way I can. I'll be at IDF next week. Hope to meet some of you folks there.

An the other hand, feel free to rant if helps. ;-)

Quoted 28 lines · David Mosberger
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines · Tim Riker

Tim> Doesn't the included CD read CD-RW, or at least CD-R? Couln't Tim> you have tested with one of those? That's what we do here and Tim> then we ship the CD-R to mastering.

<RANT>

Gee, could just _someone_ at least consider saying thanks for having a bootable CD in the first place?

I'm getting a little tired of hearing all sorts of complaints about not having a perfect CD. If I hadn't worked all night Thursday/Friday before LWE and Mike Balma and Lorraine Bartlett hadn't pulled all kinds of strings at HP with the CD manufacturing, we would not have a CD at all and you'd be struggling with boot floppies instead.

</RANT>.

Wow, I feel so much better now. ;-)

        --david

_______________________________________________
Linux-ia64 mailing list
[email protected]
http://lists.linuxia64.org/lists/listinfo/linux-ia64

Signature · 3 lines
Tim Riker - http://rikers.org/ - short SIGs! <g>
All I need to know I could have learned in Kindergarten
... if I'd just been paying attention.
#6 lore raw
In reply to Tim Riker
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line · Tim Riker

Tim> I was just making suggestions.

As far as CD-RW and DVD read capability goes: I have no idea if it does. Not something I can test easily.

Tim> An the other hand, feel free to rant if helps. ;-)

Yep, it did! ;-)

On a related note: I actually had to hack mkisofs to make it possible to install an El-Torito image bigger than 2.88MB. I'm sure I didn't do it entirely correctly, so this is something that should be looked into.

Also, if you use a recent mkisofs, no hacking will be necessary. Instead, there is now an option that let's you write "harddisk"-typed boot images (sorry, I forgot the option name, but you'll find it by searching for El Torito in the cdrecord man page). This will take some fiddling and experimenting to get right, I assume.

	--david