translating ACPI _HID & _UID to PCI bus number
I'm working on a user-space application to add a Linux entry to the IA-64 EFI Boot Manager. One component of this entry is the ACPI _HID and _UID fields, which correspond to a PCI bus number (in Linux kernel terms). I know the PCI bus number, device, and function, for a given controller. What I don't have is the ACPI _HID and _UID fields that match the PCI bus number. Any thoughts on how I can get them?
Thanks,
Matt
--
Matt Domsch
Sr. Software Engineer
Dell Linux Systems Group
Linux OS Development
www.dell.com/linux
Not all PCI devices appear in the ACPI namespace. If a PCI device shows up in the ACPI namespace, it should have _ADR, which basically is its PCI bus, device, and function number. Then you can tell the _HID and _UID associated with that device. Hope this helps.
Jun
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Wednesday, May 02, 2001 12:34 PM
To: [email protected]
Cc: [email protected]
Subject: [Linux-ia64] translating ACPI _HID & _UID to PCI bus number
I'm working on a user-space application to add a Linux entry to the IA-64 EFI Boot Manager. One component of this entry is the ACPI _HID and _UID fields, which correspond to a PCI bus number (in Linux kernel terms). I know the PCI bus number, device, and function, for a given controller. What I don't have is the ACPI _HID and _UID fields that match the PCI bus number. Any thoughts on how I can get them?
Thanks,
Matt
--
Matt Domsch
Sr. Software Engineer
Dell Linux Systems Group
Linux OS Development
www.dell.com/linux
Even with ACPI namespace, {_HID, _UID} pair does not tell the path of a device in a given topology, and can not produce a PCI bus number(vice versa)._ADR of PCI device does not provide bus number either. It's just dev +func.
So to get PCI bus number of a given PCI bus:
1. you can use _BBN of the device, but this works only on root pci bridges. I personally want to see all PCI bridges have _BBN method for OSPM's convenience, but ACPI spec does not require it for non-roots.
2. you can enumerate pci bus from root pci bridges, following PCI std df enum scheme, and access pci config space of pci bridges to get BIOS set bus numbers. (But note that bus numbers set by BIOS do not necessarily match to what OSes assign. For reasons OSes can assign bus numbers different from BIOS's. So, PCI numbers from pci config space at EFI boot manager time, it's not always the same as OSes enumerates) Afaik, linux does not alter bus numbers set by BIOS yet, but someday...)
Thus, there seems to be no perfect solutions here... to get pci bus number from acpi name space alone.
J.I.
-----Original Message-----
From: Nakajima, Jun [mailto:[email protected]]
Sent: Wednesday, May 02, 2001 1:26 PM
To: '[email protected]'; [email protected]
Cc: [email protected]
Subject: RE: [Linux-ia64] translating ACPI _HID & _UID to PCI bus number
Not all PCI devices appear in the ACPI namespace. If a PCI device shows up in the ACPI namespace, it should have _ADR, which basically is its PCI bus, device, and function number. Then you can tell the _HID and _UID associated with that device. Hope this helps.
Jun
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Wednesday, May 02, 2001 12:34 PM
To: [email protected]
Cc: [email protected]
Subject: [Linux-ia64] translating ACPI _HID & _UID to PCI bus number
I'm working on a user-space application to add a Linux entry to the IA-64 EFI Boot Manager. One component of this entry is the ACPI _HID and _UID fields, which correspond to a PCI bus number (in Linux kernel terms). I know the PCI bus number, device, and function, for a given controller. What I don't have is the ACPI _HID and _UID fields that match the PCI bus number. Any thoughts on how I can get them?
Thanks,
Matt
--
Matt Domsch
Sr. Software Engineer
Dell Linux Systems Group
Linux OS Development
www.dell.com/linux
_______________________________________________
Linux-IA64 mailing list
[email protected]
http://lists.linuxia64.org/lists/listinfo/linux-ia64
In general a PCI device does not need to have _HID or _UID, because _ADR is used for that purpose. If a PCI device happens to be on a root PCI bus, it has _HID and _UID as well. So the bus number is avaialble from _BBN on the bus, assuming that the OS does not change the PCI bus number.
So as long as you are interested in _HID and _UID of a PCI device, you should be able to assume _BBN, thus, PCI bus number.
Jun
-----Original Message-----
From: Lee, Jung-Ik
Sent: Wednesday, May 02, 2001 2:02 PM
To: Nakajima, Jun; '[email protected]'; [email protected]
Cc: [email protected]
Subject: RE: [Linux-ia64] translating ACPI _HID & _UID to PCI bus number
Even with ACPI namespace, {_HID, _UID} pair does not tell the path of a device in a given topology, and can not produce a PCI bus number(vice versa)._ADR of PCI device does not provide bus number either. It's just dev +func.
So to get PCI bus number of a given PCI bus:
1. you can use _BBN of the device, but this works only on root pci bridges. I personally want to see all PCI bridges have _BBN method for OSPM's convenience, but ACPI spec does not require it for non-roots.
2. you can enumerate pci bus from root pci bridges, following PCI std df enum scheme, and access pci config space of pci bridges to get BIOS set bus numbers. (But note that bus numbers set by BIOS do not necessarily match to what OSes assign. For reasons OSes can assign bus numbers different from BIOS's. So, PCI numbers from pci config space at EFI boot manager time, it's not always the same as OSes enumerates) Afaik, linux does not alter bus numbers set by BIOS yet, but someday...)
Thus, there seems to be no perfect solutions here... to get pci bus number from acpi name space alone.
J.I.
-----Original Message-----
From: Nakajima, Jun [mailto:[email protected]]
Sent: Wednesday, May 02, 2001 1:26 PM
To: '[email protected]'; [email protected]
Cc: [email protected]
Subject: RE: [Linux-ia64] translating ACPI _HID & _UID to PCI bus number
Not all PCI devices appear in the ACPI namespace. If a PCI device shows up in the ACPI namespace, it should have _ADR, which basically is its PCI bus, device, and function number. Then you can tell the _HID and _UID associated with that device. Hope this helps.
Jun
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Wednesday, May 02, 2001 12:34 PM
To: [email protected]
Cc: [email protected]
Subject: [Linux-ia64] translating ACPI _HID & _UID to PCI bus number
I'm working on a user-space application to add a Linux entry to the IA-64 EFI Boot Manager. One component of this entry is the ACPI _HID and _UID fields, which correspond to a PCI bus number (in Linux kernel terms). I know the PCI bus number, device, and function, for a given controller. What I don't have is the ACPI _HID and _UID fields that match the PCI bus number. Any thoughts on how I can get them?
Thanks,
Matt
--
Matt Domsch
Sr. Software Engineer
Dell Linux Systems Group
Linux OS Development
www.dell.com/linux
_______________________________________________
Linux-IA64 mailing list
[email protected]
http://lists.linuxia64.org/lists/listinfo/linux-ia64
It's not actually clear from the conversation so far what exactly Matt is after. I get the impression, however, that what he wants to do is synthesise an _HID/_UID pair, which is not quite what's being discussed here.
If that's the case, typically _HID is the 32-bit vendor/device ID of the controller, and _UID is the instance count for the given _HID, eg. the first controller has a _UID of 0, the second has a _UID of 1, etc.
Quoted 4 lines
In general a PCI device does not need to have
_HIDor_UID, because_ADRis used for that purpose. If a PCI device happens to be on a root PCI bus, it has_HIDand_UIDas well. So the bus number is avaialble from_BBNon the bus, assuming that the OS does not change the PCI bus number.
This isn't entirely correct either.
Quoted 14 lines
-----Original Message-----
From: Lee, Jung-Ik
Sent: Wednesday, May 02, 2001 2:02 PM
To: Nakajima, Jun; '[email protected]'; [email protected]
Cc: [email protected]
Subject: RE: [Linux-ia64] translating ACPI_HID&_UIDto PCI bus numberEven with ACPI namespace, {
_HID,_UID} pair does not tell the path of a device in a given topology, and can not produce a PCI bus number(vice versa)._ADRof PCI device does not provide bus number either. It's just dev +func.
Quoted 4 lines
So to get PCI bus number of a given PCI bus:
1. you can use_BBNof the device, but this works only on root pci bridges. I personally want to see all PCI bridges have_BBNmethod for OSPM's convenience, but ACPI spec does not require it for non-roots.
This is because ACPI assumes that you have a functional bus architecture. The created bus instance should know its bus number, either from _BBN or from querying the bridge's secondary bus number register, so as a device you just query your parent for its bus number.
Because Matt's tool is running in userspace, however, this may not be so easy to achieve.
Quoted 2 lines
Thus, there seems to be no perfect solutions here... to get pci bus number from acpi name space alone.
That's basically correct; you can't do this.
Signature · 5 lines
... every activity meets with opposition, everyone who acts has his
rivals and unfortunately opponents also. But not because people want
to be opponents, rather because the tasks and relationships force
people to take different points of view. [Dr. Fritz Todt]
V I C T O R Y N O T V E N G E A N C EQuoted 6 lines
It's not actually clear from the conversation so far what exactly Matt is
after. I get the impression, however, that what he wants to do is synthesise an _HID/_UID pair, which is not quite what's being discussed
here.
I'm creating a DEVICE_PATH that looks like ACPI()/PCI()/SCSI()/HardDrive(). I have the PCI bus, device, and function number (via ioctl in kernel 2.4.4) of the IDE/SCSI/FC/I2O controller, the SCSI ID and LUN, and all the Hard Drive information. I'm looking for the ACPI _HID and _UID which match the controller.
I can cheat somewhat. I do have the EFI blkX variables, which contain something like (unparsed):
/proc/efi/vars/blk0-47c7b225-c42a-11d2-8e57-00a0c969723b
Type: 2 Subtype: 1 Length: c
ACPI Device Path: ACPI Device Path
_HID: a0341d0
_GID: 1Type: 1 Subtype: 1 Length: 6
Hardware Device Path: PCI
Function 0x0, Device 0x2
Type: 3 Subtype: 2 Length: 8
Messaging Device Path: SCSI
Target ID: 0
Logical Unit Number: 0
I could look for a device that matches on PCI device,function and SCSI ID/LUN, and then copy the ACPI Device Path portion, but that still leaves open the possibility of a PCI device on a separate bus that happens to match all these fields.
Quoted 5 lines
If that's the case, typically
_HIDis the 32-bit vendor/device ID of the
controller, and_UIDis the instance count for the given_HID, eg. the
first controller has a_UIDof 0, the second has a_UIDof 1, etc.
From this example, taken from actual hardware, the _HID is not anything like the PCI vendor/device ID. In this case this is a QLogic 12160 PCI SCSI controller, 0x1077/0x1216.
Quoted 3 lines
Quoted 2 lines
So to get PCI bus number of a given PCI bus:
1. you can use_BBNof the device, but this works only onroot pci bridges.
This isn't a bridge, so no luck.
Quoted 8 lines
Because Matt's tool is running in userspace, however, this may not be so
easy to achieve.Quoted 2 lines
Thus, there seems to be no perfect solutions here... to get pci bus number from acpi name space alone.
That's basically correct; you can't do this.
I appreciate the help. If there isn't a way to do this *today*, what steps might we take to make this information available in the future?
Thanks,
Matt
Signature · 5 lines
Matt Domsch Sr. Software Engineer Dell Linux Systems Group Linux OS Development www.dell.com/linux