Skip to contentSkip to conversation

GUID filesystem+device identification ?

Linux-ia64 Martin Wilck 2 participants 3 messages May 18, 2001

lore
Share & tools
lore
#0 lore raw

Hi all,

Has anybody yet thought about the possibility to use
a mechanism like devfs for identifying devices and file systems by their GUID? This would be a major improvement over Linux's current approach of identifying devices, particularly disk drives.

In principle, it would be possible to change controllers and disks arbitrarily and still maintain a valid file system in which all devices and sub-file systems would be identified by ther GUIDs (think of the device in fstab specified by GUID instead of /dev/sda3 or whatever).

I think something like this could well coexist with devfs in its current implementation, e.g. by a collection of softlinks , something like

/dev/guid/disk/[DISK_GUID]->/dev/scsi/host1/bus0/target2/lun0 /dev/guid/partitions/[PARTITION_GUID]->(you guess).

where these links would be auto-generated when a driver encounters a disk and and the partition table is analyzed.

Links for other devices could of course also exist in /dev/guid, although I think disks and parttions give most benefit.

The approach above would allow entries like

/dev/[PARTITION_GUID] /usr ext2 defaults 2 1

in fstab, so no need to change fstab if controllers or disks are added/removed in a system.

Unlike the "filesystem label" approach, this would work with any filesystem type, and even for entire disks and other devices.

Is anybody working on something like this, or does it even exist already?
If no, what is your opinion on its usefulness?

Regards,
Martin

Signature · 2 lines
Martin Wilck     <[email protected]>
FSC EP PS DS1, Paderborn      Tel. +49 5251 8 15113
#1 lore raw
Quoted 8 lines · Martin Wilck

Hi all,

Has anybody yet thought about the possibility to use
a mechanism like devfs for identifying devices and file systems by their GUID? This would be a major improvement over Linux's current approach of identifying devices, particularly disk drives.

Quoted 5 lines

In principle, it would be possible to change controllers and disks arbitrarily and still maintain a valid file system in which all devices and sub-file systems would be identified by ther GUIDs (think of the device in fstab specified by GUID instead of /dev/sda3 or whatever).

I think support for GUID=foo in /etc/fstab for mount would be pretty easy. Having it in ther kernel would be nicer and shouldn't be that difficult, on the other hand it'll need a consensus on wether the kernel should look at every partition on startup - IIRC some people where opposed to such soloutions in the past.

Christoph

Signature · 1 line
Of course it doesn't work. We've performed a software upgrade.
#2 lore raw
In reply to Martin Wilck
Quoted 5 lines

Having it in ther kernel would be nicer and shouldn't be that difficult, on the other hand it'll need a consensus on wether the kernel should look at every partition on startup - IIRC some people where opposed to such soloutions in the past.

The kernel looks at partition type GUID of all partitions already (in fs/partitions/efi.c), all it would need to do apart from that look at the Unique GUID as well and create a GUID->device table somewhere.

Cheers, Martin

Signature · 2 lines
Martin Wilck     <[email protected]>
FSC EP PS DS1, Paderborn      Tel. +49 5251 8 15113