Upgrading from 2.4.3
Hi,
Can anyone tell me what firmware / BIOS is needed for newer kernels? I'm attempting to upgrade our LION currently running 2.4.3 (Red Hat Linux release 7.0.98 (Wolverine))
I've compiled 2.4.13, installed it, but it panics when booting, somewhere after scanning the PCI bus. I've also burnt Debian woody for ia64 onto CD, but this just hangs when booting (it prints some kernel messages then hangs). Our BIOS / firmware is on BIOS 69, and I've attempted to upgrade, but our I/O card is 'legacy', so BIOS 69 is the latest it can run.
Can I run newer kernels, or will I have to get a new box? /proc/cpuinfo says:
processor : 0
vendor : GenuineIntel
family : IA-64
model : Itanium
revision : 2
archrev : 0
features : standard
cpu number : 0
cpu regs : 4
cpu MHz : 666.738000
itc MHz : 666.738000
BogoMIPS : 442.49
Thanks,
Jon.
Signature · 3 lines
Jonathan Thackray Zeus House, Cowley Road, Cambridge CB4 OZT, UK Software Engineer +44 1223 525000, fax +44 1223 525100 Zeus Technology http://zeus.com/
Jonathan:
It appears your processor stepping is older that is being supported now days.
Caldera supports only B3 and higher stepping and I believe the other vendors do the same. Updating the BIOS will not help in this case. Getting the source and rebuilding with switches for older processors may help if you find a release that still has the switches/code to support you.
Doug
Quoted 42 lines · Jonathan Thackray
Hi,
Can anyone tell me what firmware / BIOS is needed for newer kernels? I'm attempting to upgrade our LION currently running 2.4.3 (Red Hat Linux release 7.0.98 (Wolverine))
I've compiled 2.4.13, installed it, but it panics when booting, somewhere after scanning the PCI bus. I've also burnt Debian woody for ia64 onto CD, but this just hangs when booting (it prints some kernel messages then hangs). Our BIOS / firmware is on BIOS 69, and I've attempted to upgrade, but our I/O card is 'legacy', so BIOS 69 is the latest it can run.
Can I run newer kernels, or will I have to get a new box?
/proc/cpuinfosays:processor : 0
vendor : GenuineIntel
family : IA-64
model : Itanium
revision : 2
archrev : 0
features : standard
cpu number : 0
cpu regs : 4
cpu MHz : 666.738000
itc MHz : 666.738000
BogoMIPS : 442.49Thanks,
Jon.--
Jonathan Thackray Zeus House, Cowley Road, Cambridge CB4 OZT, UK
Software Engineer +44 1223 525000, fax +44 1223 525100
Zeus Technology http://zeus.com/_______________________________________________
Linux-IA64 mailing list
[email protected]
http://lists.linuxia64.org/lists/listinfo/linux-ia64
Signature · 4 lines
Douglas B. Beattie ------------------ Linux Test Architect - Caldera, Inc. [email protected]
Hi Jonathan,
I would request you to file QuAD case so that support team at Intel can review your current hardware level and determine MAX BIOS level that you can use. Hope this helps.
Thanks
Sunil
-----Original Message-----
From: Doug Beattie [mailto:[email protected]]
Sent: Friday, November 02, 2001 8:21 AM
To: Jonathan Thackray
Cc: [email protected]
Subject: Re: [Linux-ia64] Upgrading from 2.4.3
Jonathan:
It appears your processor stepping is older that is being supported now days.
Caldera supports only B3 and higher stepping and I believe the other vendors do the same. Updating the BIOS will not help in this case. Getting the source and rebuilding with switches for older processors may help if you find a release that still has the switches/code to support you.
Doug
Quoted 42 lines · Jonathan Thackray
Hi,
Can anyone tell me what firmware / BIOS is needed for newer kernels? I'm attempting to upgrade our LION currently running 2.4.3 (Red Hat Linux release 7.0.98 (Wolverine))
I've compiled 2.4.13, installed it, but it panics when booting, somewhere after scanning the PCI bus. I've also burnt Debian woody for ia64 onto CD, but this just hangs when booting (it prints some kernel messages then hangs). Our BIOS / firmware is on BIOS 69, and I've attempted to upgrade, but our I/O card is 'legacy', so BIOS 69 is the latest it can run.
Can I run newer kernels, or will I have to get a new box?
/proc/cpuinfosays:processor : 0
vendor : GenuineIntel
family : IA-64
model : Itanium
revision : 2
archrev : 0
features : standard
cpu number : 0
cpu regs : 4
cpu MHz : 666.738000
itc MHz : 666.738000
BogoMIPS : 442.49Thanks,
Jon.--
Jonathan Thackray Zeus House, Cowley Road, Cambridge CB4 OZT, UK
Software Engineer +44 1223 525000, fax +44 1223 525100
Zeus Technology http://zeus.com/_______________________________________________
Linux-IA64 mailing list
[email protected]
http://lists.linuxia64.org/lists/listinfo/linux-ia64
Signature · 9 lines
Douglas B. Beattie ------------------ Linux Test Architect - Caldera, Inc. [email protected] _______________________________________________ Linux-IA64 mailing list [email protected] http://lists.linuxia64.org/lists/listinfo/linux-ia64