Skip to contentSkip to conversation

Qlogic scsi driver (was Re: [Linux-ia64] kacpidpc process takes 100% of CPU)

DISCUSSION Randall G Chan 2 participants 2 messages Nov 13, 2001 – Nov 15, 2001

lore
Share & tools
lore
#0 lore raw

"Naturally the process ignores my 'kill -9's. I've tried booting the kernel on single proc Lions (733 C0s), but the kernel won't even boot on those systems (hangs right after it loads the SCSI driver is begins looking for devices)"

I've actually noticed this too on both kernels 2.4.13 & 2.4.14. I have not yet been able to figure out what's wrong with it. I have a kernel that works fine on a 4-way C0 Lion, BIOS 99, but when I stick it on a single C0 BIOS 99, the kernel hangs in the above spot (prints out copyright info and driver version, then just hangs when it's <seemingly> scanning the scsi bus). Anyone else notice this or have a solution?

Thanks,
Randy Chan
Mylex - An IBM Company
Software Engineer
[email protected]

--------------------------------------------------------------------------

                    "Paris, DavidX"                                                                                      
                    <davidx.paris@intel.       To:     "'[email protected]'" <[email protected]>           
                    com>                       cc:                                                                       
                    Sent by:                   Subject:     [Linux-ia64] kacpidpc process takes 100% of CPU              
                    linux-ia64-admin@lin                                                                                 
                    uxia64.org                                                                                           
                                                                                                                         
                                                                                                                         
                    11/13/2001 09:43 AM                                                                                  

I've just built 2.4.13 and 2.4.14 with and without the KDB patch and in all cases when the system comes up there is a kacpidpc process (PID 10) taking 100% of one of the cpus (changes which CPU it's on every boot). The system is a 4 processor Lion (733 Mhz B3) with 1 gig of ram. This process isn't even running when I build the same kernels on a BigSpur. I've even tried copying over the very kernel that works fine on the BigSpur, but when I boot
it on the Lion I get this kacpidpc process. Naturally the process ignores my
'kill -9's. I've tried booting the kernel on single proc Lions (733 C0s), but the kernel won't even boot on those systems (hangs right after it loads the SCSI driver is begins looking for devices). Does anyone have any idea why this kacpidpc process is hogging one of the CPUs, and how I go about getting rid of it? Unlike in the IA32 kernels, it doesn't look like you can turn off ACPI in the IA64 kernel. Thanks,

David

_______________________________________________
Linux-IA64 mailing list
[email protected]
http://lists.linuxia64.org/lists/listinfo/linux-ia64

#1 lore raw
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Randall" = Randall G Chan <[email protected]> writes:

Randall> I've actually noticed this too on both kernels 2.4.13 & Randall> 2.4.14. I have not yet been able to figure out what's wrong Randall> with it. I have a kernel that works fine on a 4-way C0 Lion, Randall> BIOS 99, but when I stick it on a single C0 BIOS 99, the Randall> kernel hangs in the above spot (prints out copyright info and Randall> driver version, then just hangs when it's <seemingly> Randall> scanning the scsi bus). Anyone else notice this or have a Randall> solution?

Which version of the SCSI driver are you using? I am maintaining a patch at http://www.wildopensource.com/~jes/linux/ which contains a large number of bug fixes and cleanups.

However I don't have access to a Lion so I can't reproduce this.

Cheers
Jes