kernel panic on root mount / EFI can’t see /boot/efi partition!
Using Redhat 7.2 and in the past 7.1, I cannot configure the /boot/efi partition with such a type definition that EFI will recognize the file-system and thus use it for booting purposes. Our boot procedure has been to boot into Whistler and copy over the data to a LS120 and then setup to boot from there. This is occurring on our BigSur, Lion, and Azusa machines.
Unfortunately, whenever I rebuild a kernel, (currently attempting with 2.4.14, but also tried 2.4.10 and have only tested on the BigSur), the kernel panics without being capable of mounting the root partition. This occurs even with the default configuration of the kernel and I suspect the two problems may be linked. It is troubling however that while the default Redhat kernel will mount the (/) root system after loading the qla1260 driver from the initrd file, when I have my new kernel configured to compile and include qla1260 it still results in a kernel panic. Is building an initrd file for each kernel rebuild truly going to help the situation? Has anybody else seen a situation where EFI refuses to recognize a FAT16 defined partition? Perhaps Whistler is mangling the partition tables on all the accessible disks? Could these problems be linked?
Thank-you for your help,
Jared Egolf
__________________________________________________
Do You Yahoo!?
Find the one for you at Yahoo! Personals
http://personals.yahoo.com
Re: [Linux-ia64] kernel panic on root mount / EFI cant see
Quoted 4 lines · [email protected] (Jared Egolf) writes:
Using Redhat 7.2 and in the past 7.1, I cannot configure the
/boot/efipartition with such a type definition that EFI will recognize the file-system and thus use it for booting purposes.
FYI, it appears the defined partition type for EFI FAT is 'ef', and for EFI GPT it's 'ee'. Debian currently requires that you use 'ef'.
Modern versions of fdisk, cfdisk, et al know these types...
Bdale
[Linux-ia64] kernel panic on root mount / EFI cant see
In reply to Jared EgolfThank you very much for your reply. I did double check and I am having this problem on a system where the partition type is set to 'ef'. It doesn't seem to matter which partition type I attempt to use.
-- Jared Egolf
Quoted 11 lines
From: Bdale Garbee <[email protected]>
Date: Thu, 15 Nov 2001 17:47:42 -0700Quoted 4 lines · [email protected] (Jared Egolf) writes:
Using Redhat 7.2 and in the past 7.1, I cannot configure the
/boot/efipartition with such a type definition that EFI will recognize the file-system and thus use it for booting purposes.FYI, it appears the defined partition type for EFI FAT is
'ef', and for
Quoted 1 line
EFI GPT it's 'ee'. Debian currently requires that you
use 'ef'.
Quoted 1 line
Modern versions of fdisk, cfdisk, et al know these
types...
Quoted 1 line
Bdale
__________________________________________________
Do You Yahoo!?
Find the one for you at Yahoo! Personals
http://personals.yahoo.com