Linux 2.4.17-pre6 drm-4.0
Quoted 2 lines · Keith Owens
How long do people plan to keep drm 4.0 code in their versions of the kernel?
For 2.5, there probably is no intention of keeping that around. But can we honestly ditch it in the middle of a stable kernel? Personally I don't use it, but its not polite ...
Robert Love
Quoted 8 lines · Robert Love
Quoted 2 lines · Keith Owens
How long do people plan to keep drm 4.0 code in their versions of the kernel?
For 2.5, there probably is no intention of keeping that around. But can we honestly ditch it in the middle of a stable kernel? Personally I don't use it, but its not polite ...
Linus ditched drm 4.0 months ago. It only survives in arch add on patches like ia64 and in -ac trees.
Quoted 8 lines · Keith Owens
Quoted 3 lines · Robert Love
For 2.5, there probably is no intention of keeping that around. But can we honestly ditch it in the middle of a stable kernel? Personally I don't use it, but its not polite ...
Linus ditched drm 4.0 months ago. It only survives in arch add on patches like ia64 and in -ac trees.
I know. I meant we should continue to support the drm-4.0 package. It's the usual song ... we shouldn't change interfaces or required tools in a stable series, and the least we can do is make 4.0 available somehow, because someone may rely on it.
On the flip side, I don't care, and I suspect the people who actually are using DRM are on 4.1 now. Further, if _you_ are maintaining the cruft and it bothers _you_, then stop :)
Robert Love
Quoted 2 lines
Linus ditched drm 4.0 months ago. It only survives in arch add on patches like ia64 and in -ac trees.
No, it also survives as an add-on tarball for the standard kernel:
http://www.kernel.org/pub/linux/kernel/v2.4/drm-4.0.x.tar.bz2
Let me dig through my old mail so I can quote Linus on this... Here's what he said in his Linux 2.4.8 announcement message (Subject "Linux-2.4.8", sent on August 10th of this year):
Quoted 10 lines
Ok, this one has various VM niceness tweaks that have made some people much happier. It also does a upgrade to the XFree86-4.1.x style DRM code, which means that people with XFree86-4.0.x can no longer use the built-in kernel DRM by default.
However, never fear. It's actually very easy to get the old DRM code too:
if you used to use the standard kernel DRM and do not want to upgrade to a new XFree86 setup, just get the "drm-4.0.x" package from the same place you get the kernel from, and do
Quoted 7 lines
- unpack the kernel
- cd linux/drivers/char
- unpack the "drm-4.0.x" package here
- mv drm new-drm
- mv drm-4.0.x drmand you should be all set.
The impression I get (for 2.4) is that DRM 4.1 comes standard but you should still be able to use 4.0 if you want, via that tarball.
-Barry K. Nathan <[email protected]>
Quoted 6 lines
Quoted 2 lines
How long do people plan to keep drm 4.0 code in their versions of the kernel?
For 2.5, there probably is no intention of keeping that around. But can we honestly ditch it in the middle of a stable kernel? Personally I don't use it, but its not polite ...
I said it shouldn't have been ditched, Linus overruled.
Quoted 2 lines
to get rid of them asap. The SiS direct render is only for drm 4.1 so now is a good time to question if 4.0 is still required.
That argument doesnt fly. The 4.0 DRM is the only working GMX renderer..
Quoted 4 lines · Alan Cox
Quoted 2 lines
to get rid of them asap. The SiS direct render is only for drm 4.1 so now is a good time to question if 4.0 is still required.
That argument doesnt fly. The 4.0 DRM is the only working GMX renderer..
So what DRM can build out of tree easily - e.g. the Caldera LTP (3.1 early access) had a DRM package built completly out of tree.
David, would you remove drm-4.0 from the ia64 patch if I'd do the work again and package an up-to-date and ia64-capable drm 4.0 out-of-tree?
Christoph
Signature · 1 line
Of course it doesn't work. We've performed a software upgrade.
Quoted 2 lines
So what DRM can build out of tree easily - e.g. the Caldera LTP (3.1 early access) had a DRM package built completly out of tree.
XFree86 4.0, 4.1, ... ship with the DRM kernel modules buildable from the XFree86 tree too
Quoted 5 lines · Alan Cox
Quoted 2 lines
So what DRM can build out of tree easily - e.g. the Caldera LTP (3.1 early access) had a DRM package built completly out of tree.
XFree86 4.0, 4.1, ... ship with the DRM kernel modules buildable from the XFree86 tree too
Been there, done that.
Having seen the XFree build process this doesn't look like an option to me anymore. Also a separate tarball easyfies building a new set of modules for a new kernel a lot.
Christoph
Signature · 1 line
Of course it doesn't work. We've performed a software upgrade.
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line · Christoph Hellwig
Christoph> David, would you remove drm-4.0 from the ia64 patch if I'd do the work Christoph> again and package an up-to-date and ia64-capable drm 4.0 out-of-tree?
In my opinion it's extremely bad style to remove drm-4.0 from the 2.4 kernel (remember, it's supposed to be a *stable* kernel series). As far as I know, there are binary-only drivers out there that work only with drm-4.0. I don't think it's fair to break someones working setup just because of a kernel upgrade.
But if there is a good reason to remove it, I'm certainly willing to listen. My understanding is that for Keith it's good enough if drm-4.0 goes away in 2.5.
--david
Quoted 2 lines · David Mosberger
In my opinion it's extremely bad style to remove drm-4.0 from the 2.4 kernel (remember, it's supposed to be a *stable* kernel series).
Agreed. Stil I don't think specific ports should fix that up - this will sooner or later leed to a full fork.
Quoted 4 lines
As
far as I know, there are binary-only drivers out there that work only with drm-4.0. I don't think it's fair to break someones working setup just because of a kernel upgrade.
_Any_ kernel update may break binary drivers.
Quoted 3 lines
But if there is a good reason to remove it, I'm certainly willing to listen. My understanding is that for Keith it's good enough if drm-4.0 goes away in 2.5.
My opinion is that including the drm changes in the ia64 patch just makes the diff to handle much bigger.
Marcelo, are you willing to put in drm 4.0 as option in 2.4.18 again?
Christoph
Signature · 1 line
Of course it doesn't work. We've performed a software upgrade.
Quoted 14 lines · Christoph Hellwig
Quoted 2 lines · David Mosberger
In my opinion it's extremely bad style to remove drm-4.0 from the 2.4 kernel (remember, it's supposed to be a *stable* kernel series).
Agreed. Stil I don't think specific ports should fix that up - this will sooner or later leed to a full fork.
Quoted 4 lines
As
far as I know, there are binary-only drivers out there that work only with drm-4.0. I don't think it's fair to break someones working setup just because of a kernel upgrade._Any_ kernel update may break binary drivers.
Quoted 8 lines
Quoted 3 lines
But if there is a good reason to remove it, I'm certainly willing to listen. My understanding is that for Keith it's good enough if drm-4.0 goes away in 2.5.
My opinion is that including the drm changes in the ia64 patch just makes the diff to handle much bigger.
Marcelo, are you willing to put in drm 4.0 as option in 2.4.18 again?
Why would I ?
What is wrong with the current drm version ?
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"marcelo" = Marcelo Tosatti <[email protected]> writes:
Quoted 14 lines · Christoph Hellwig
Quoted 14 lines · David Mosberger
Quoted 2 lines
In my opinion it's extremely bad style to remove drm-4.0 from the 2.4 kernel (remember, it's supposed to be a *stable* kernel series).
Agreed. Stil I don't think specific ports should fix that up - this will sooner or later leed to a full fork.
Quoted 4 lines
As
far as I know, there are binary-only drivers out there that work only with drm-4.0. I don't think it's fair to break someones working setup just because of a kernel upgrade._Any_ kernel update may break binary drivers.
Quoted 8 lines
Quoted 8 lines
Quoted 3 lines
But if there is a good reason to remove it, I'm certainly willing to listen. My understanding is that for Keith it's good enough if drm-4.0 goes away in 2.5.
My opinion is that including the drm changes in the ia64 patch just makes the diff to handle much bigger.
Marcelo, are you willing to put in drm 4.0 as option in 2.4.18 again?
marcelo> Why would I ?
marcelo> What is wrong with the current drm version ?
That you need to have XFree 4.1 installed, if you have XFree4.0, then you can't have drm :(
Yes, that drm is incompatible sucks :(
Later, Juan.
Signature · 2 lines
In theory, practice and theory are the same, but in practice they are different -- Larry McVoy