Skip to contentSkip to conversation

success with remote power mgmt of Lions

Linux-ia64 Robert K Gjertsen 1 participant 1 message Feb 7, 2002

lore
Share & tools
lore
#0 lore raw

Finally figured out how to reboot and power up/down these Lions remotely on the cheap (can't afford a remote power switch with 20A sockets).

Basically it involves updating some firmware parameters for the BMC with a program I snagged from IBM (and this is probably available from Intel), and then using the ISC client program I grabbed from Intel that I'm running on an NT box which allows remote system power management of the Lion boxes
over a LAN.

I've tried this on 2 of my Lions at FW 83B w/
BMC 22. I don't believe this will work with an
SDV desktop box though.

The program for toggling BMC parameters from IBM is

IBM e(logo)server xSeries 380 - Server Management Configuration Utility v
1.01

and at the link:

http://www-1.ibm.com/support/manager.wss?rs=0&rt=1&q=xSeries+380&mr 0&r&cid=2

When running the program at the efi prompt you'll want to mainly work with the ECP and LAN sections in the program to set the network settings and activate things for power management (and make sure to set up passwords).

Right now we are using the latest intel ISC client on an NT box. I grabbed v 3.5 from the following site under "Software & Drivers"
http://www.intel.com/support/motherboards/server/isc/INDEX.HTM.
I only really use the "DPC Console manager" for power manager in this program and keep a "phonebook" of the Lion servers.

Usual disclaimer that none of this is supported by IBM or Intel. I think that should be enough info to get this set up.

It would be nice to get the CD from Intel that would allow setting up a service partiiton and seeing if I could get remote console management working (even though this also isn't supported). Sort of wonder in general why this stuff isn't supported at all when the hardware/bios capabilities are all in place for this.

--Rob