CONFIG_USB_UHCI=y not possible?
When I try to change CONFIG_USB_UHCI from a module to static (=m to =y), I get:
drivers/usb/usbdrv.o: In function `alloc_uhci':
drivers/usb/usbdrv.o(.text.init+0x7e2): relocation truncated to fit: PCREL21B uhci_pci_remove
I don't see anything obvious (to me) with the disassembly:
7e0: 11 60 01 40 00 21 [MIB] mov r44=r32
7e6: 00 00 00 02 00 00 nop.i 0x0
7ec: 08 00 00 50 br.call.sptk.many b0~0 <alloc_uhciIt's see the same problem in a different kernel, with the same code at a different offset (0x672).
Anyone have any idea what's going on with this?
Also, I have some recollection seeing something that said that USB support has to be a module, maybe because it doesn't see the devices otherwise? Any truth to this?
Thanks,
John
John,
Quoted 8 lines · John Hesterberg
When I try to change
CONFIG_USB_UHCIfrom a module to static (=m to =y), I get:
drivers/usb/usbdrv.o: In function `alloc_uhci':
drivers/usb/usbdrv.o(.text.init+0x7e2): relocation truncated to fit: PCREL21Buhci_pci_removeI don't see anything obvious (to me) with the disassembly:
Quoted 9 lines
7e0: 11 60 01 40 00 21 [MIB] mov r44=r32 7e6: 00 00 00 02 00 00 nop.i 0x0 7ec: 08 00 00 50 br.call.sptk.many b0~0 <alloc_uhciIt's see the same problem in a different kernel, with the same code at a different offset (
0x672).Anyone have any idea what's going on with this?
Your kernel is too big (exceed range for relocation). You have to compile some subsystems as modules.
Signature · 1 line
-Stephane
Quoted 15 lines · Stephane Eranian
John,
Quoted 12 lines · John Hesterberg
When I try to change
CONFIG_USB_UHCIfrom a module to static (=m to =y), I get:
drivers/usb/usbdrv.o: In function `alloc_uhci':
drivers/usb/usbdrv.o(.text.init+0x7e2): relocation truncated to fit: PCREL21Buhci_pci_removeI don't see anything obvious (to me) with the disassembly:
7e0: 11 60 01 40 00 21 [MIB] mov r44=r32 7e6: 00 00 00 02 00 00 nop.i 0x0 7ec: 08 00 00 50 br.call.sptk.many b0~0 <alloc_uhci
Quoted 10 lines
Quoted 5 lines
It's see the same problem in a different kernel, with the same code at a different offset (
0x672).Anyone have any idea what's going on with this?
Your kernel is too big (exceed range for relocation). You have to compile some subsystems as modules.
Signature · 1 line
-Stephane
I don't think that's it. I've hit this problem with very different configurations, with other stuff turned on and off. It fails at this exact spot.
As Bill Nottingham noted, I think it's because the USB UHCI code is calling a init function from an exit function, or maybe vice versa. I'm guessing that some of the err handling code in alloc_uhci is somehow ending up calling uhci_pci_remove, which is defined as __devexit, which gets discarded by arch/ia64/vmlinux.lds.S. So I think I've almost connected the dots. :-)
John
John Hesterberg <[email protected]> writes:
|> As Bill Nottingham noted, I think it's because the USB UHCI code is |> calling a init function from an exit function, or maybe vice versa. |> I'm guessing that some of the err handling code in alloc_uhci is |> somehow ending up calling uhci_pci_remove, which is defined as |> __devexit, which gets discarded by arch/ia64/vmlinux.lds.S. So I |> think I've almost connected the dots. :-)
Yes, that has already been fixed in 2.4.18-rc1.
Andreas.
Signature · 4 lines
Andreas Schwab, SuSE Labs, [email protected] SuSE GmbH, Deutschherrnstr. 15-19, D-90429 Nürnberg Key fingerprint = 58CA 54C7 6D53 942B 1756 01D3 44D5 214B 8276 4ED5 "And now for something completely different."
Quoted 5 lines · John Hesterberg
When I try to change
CONFIG_USB_UHCIfrom a module to static (=m to =y), I get:
drivers/usb/usbdrv.o: In function `alloc_uhci':
drivers/usb/usbdrv.o(.text.init+0x7e2): relocation truncated to fit: PCREL21Buhci_pci_remove
OK, I think this is because alloc_uhci() calls uhci_pci_remove(), which is defined as __devexit. This gets dropped when it's not a module.
Below is a quick patch if anyone is interested. I don't know if this is right or not, but it links.
I'll take this up with the USB maintainer(s).
Seems like if they allow CONFIG_USB_UHCI=y,
then this should be fixed.
John
drivers/usb/usb-uhci.c +2 -0
@@ -3001,7 +3001,9 @@ s->irq = irq;if (uhci_start_usb (s) <0 ) { +#if defined(MODULE ) || defined(CONFIG_HOTPLUG )uhci_pci_remove (dev); +#endif return -1 ; }
Quoted 5 lines · John Hesterberg
OK, I think this is because
alloc_uhci()callsuhci_pci_remove(), which is defined as__devexit. This gets dropped when it's not a module.Below is a quick patch if anyone is interested. I don't know if this is right or not, but it links.
It's not the correct thing to do.
Quoted 1 line
I'll take this up with the USB maintainer(s).
I already know about it :)
Quoted 2 lines
Seems like if they allow
CONFIG_USB_UHCI=y,
then this should be fixed.
It's been fixed for quite some time now in the 2.4.18-pre series. Grab 2.4.18-rc2 and let me know if you still have this problem.
thanks,
greg k-h
This is fixed in 2.4.18-pre2 (or earlier) by removing the __devexit on uhci_pci_remove. I wish I'd noticed that sooner. :-)
I'm done replying to my own mails now.
John
Quoted 37 lines · John Hesterberg
Quoted 5 lines · John Hesterberg
When I try to change
CONFIG_USB_UHCIfrom a module to static (=m to =y), I get:
drivers/usb/usbdrv.o: In function `alloc_uhci':
drivers/usb/usbdrv.o(.text.init+0x7e2): relocation truncated to fit: PCREL21Buhci_pci_removeOK, I think this is because
alloc_uhci()callsuhci_pci_remove(), which is defined as__devexit. This gets dropped when it's not a module.Below is a quick patch if anyone is interested. I don't know if this is right or not, but it links.
I'll take this up with the USB maintainer(s).
Seems like if they allowCONFIG_USB_UHCI=y,
then this should be fixed.John
diff -Naur
2.4.17-sn2/drivers/usb/usb-uhci.clinux/drivers/usb/usb-uhci.cdrivers/usb/usb-uhci.c +2
-0@@ -3001,7 +3001,9 @@ s->irq = irq;if (uhci_start_usb (s) <0 ) { +#if defined(MODULE ) || defined(CONFIG_HOTPLUG )uhci_pci_remove (dev); +#endif return -1 ; }_______________________________________________
Linux-IA64 mailing list
[email protected]
http://lists.linuxia64.org/lists/listinfo/linux-ia64