Skip to contentSkip to conversation

running X with 2.4.18 kernel

Linux-ia64 Chris McDermott 5 participants 8 messages Apr 23, 2002 – Mar 11, 2003

lore
Share & tools
lore
#0 lore raw

Anybody running X with a 2.4.18 (either 0226 or 0410 ia64 patch) kernel? I discovered a couple of weeks ago that it didn't work, at least with the kernels I'm building. Now, I'm finally getting around to trying this again. The systems that fail are running RH 7.2 (with XFree86-4.1.0-8 or XFree86-4.1.0-15). I have also built and installed XFree86 4.2.0, same results. I'm just now starting to debug this, but thought I'd take the lazy way out first and see if anybody else has seen/solved this. Here is what I see in the log file:

(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"

	compiled for 4.2.0, module version = 0.1.0
	ABI class: XFree86 Video Driver, version 0.5

Fatal server error:
Caught signal 11. Server aborting

Thanks,

Chris

#1 lore raw
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line · Chris McDermott

Chris> Anybody running X with a 2.4.18 (either 0226 or 0410 ia64 Chris> patch) kernel?

Yes, I am.

Chris> I discovered a couple of weeks ago that it
Chris> didn't work, at least with the kernels I'm building. Now, I'm Chris> finally getting around to trying this again. The systems that Chris> fail are running RH 7.2 (with XFree86-4.1.0-8 or Chris> XFree86-4.1.0-15). I have also built and installed XFree86 Chris> 4.2.0, same results. I'm just now starting to debug this, but Chris> thought I'd take the lazy way out first and see if anybody Chris> else has seen/solved this.

Search the earlier kernel patch announcements for chatr. Then do:

	chatr -E /usr/X11R6/bin/XFree86

BTW: I did try to make the announcement as conspicuous as possible. I guess it still didn't work...

	--david
#2 lore raw
In reply to Chris McDermott

Have you chatr'd your X executable? Stack pages are not executable by default starting in 2.4.18. See David's patch announcement for the fix.

Signature · 3 lines
Bjorn Helgaas - bjorn_helgaas at hp.com
Linux Systems Operation R&D
Hewlett-Packard
#3 lore raw
In reply to Chris McDermott
Quoted 4 lines

Anybody running X with a 2.4.18 (either 0226 or 0410 ia64 patch) kernel?
I discovered a couple of weeks ago that it didn't work, at least with the kernels I'm building.

See the release notes for the first 2.4.18 patch that David made. He included a program to allow executable stack for certain apps (like X), while keeping it non-executable by default. X needs to have an executable stack for scanpci to work. After running David's program, it works fine for me.

Thanks,
Matt

--
Matt Domsch
Sr. Software Engineer
Dell Linux Solutions www.dell.com/linux
Linux on Dell mailing lists @ http://lists.us.dell.com
#1 US Linux Server provider for 2001!

#4 lore raw
In reply to Chris McDermott
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line · On Tue, 23 Apr 2002 16:07:53 -0500, [email protected] said:

Matt> X needs to have an executable stack for scanpci to Matt> work. After running David's program, it works fine for me.

BTW: a fix for the X server which will obviate the need for chatr has been submitted by the Debian maintainer of the X11 package. I'm not tracking the status (too many other things to worry about), but I expect that the X maintainers will eventually get around to fixing this.

	--david
#5 lore raw
In reply to Chris McDermott
Quoted 16 lines · David Mosberger
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line · Chris McDermott

Chris> Anybody running X with a 2.4.18 (either 0226 or 0410 ia64 Chris> patch) kernel?

Yes, I am.

Chris> I discovered a couple of weeks ago that it
Chris> didn't work, at least with the kernels I'm building. Now, I'm Chris> finally getting around to trying this again. The systems that Chris> fail are running RH 7.2 (with XFree86-4.1.0-8 or Chris> XFree86-4.1.0-15). I have also built and installed XFree86 Chris> 4.2.0, same results. I'm just now starting to debug this, but Chris> thought I'd take the lazy way out first and see if anybody Chris> else has seen/solved this.

Quoted 8 lines

Search the earlier kernel patch announcements for chatr. Then do:

	chatr -E /usr/X11R6/bin/XFree86

BTW: I did try to make the announcement as conspicuous as possible. I guess it still didn't work...

	--david

Well, it was very conspicuous if I would have RTFMed in the first place. Sorry to waste everyone's time.

Chris

#6 lore raw
In reply to Chris McDermott

I'n trying to run X with 2.4.18 kernel and get the following error in the log file:

(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor="The XFree86 Project"

	compiled for 4.2.0, module version = 0.1.0
	ABI class: XFree86 Video Driver, version 0.5

Fatal server error:
Caught signal 11. Server aborting

I have read all the postings on this archive regarding this problem and tried running the chatr script (from ftp://ftp.hpl.hp.com/pub/linux-ia64/chatr-v0.0.tar.gz) that David had posted, I'm getting a whole lot of syntax errors. What could be the problem?

Where can I get the release notes for the first 2.4.18 patch that David made?

Thanks

Zac

__________________________________________________
Do you Yahoo!?
Yahoo! Web Hosting - establish your business online
http://webhosting.yahoo.com

#7 lore raw
In reply to Chris McDermott
Quoted 1 line · Zac Morris

I'n trying to run X with 2.4.18 kernel ...

That's a pretty old kernel! The ia64 patch was released over a year ago. All else being equal, it will be much easier to help you if you're running a more current kernel. The 2.4.20 ia64 patch was released on 12/10/2002, and has no major known issues.

Quoted 5 lines

I have read all the postings on this archive regarding this problem and tried running the chatr script (from ftp://ftp.hpl.hp.com/pub/linux-ia64/chatr-v0.0.tar.gz) that David had posted, I'm getting a whole lot of syntax errors. What could be the problem?

Did you compile chatr? It compiles fine for me:

    09:15:43 lp:~$ socksify wget -q ftp://ftp.hpl.hp.com/pub/linux-ia64/chatr-v0.0.tar.gz
    09:15:59 lp:~$ tar -zxvf chatr-v0.0.tar.gz
    chatr.c
    09:16:02 lp:~$ cc chatr.c
    09:16:08 lp:~$ 

If you're having trouble compiling it, please include the actual error messages you're seeing.

Quoted 2 lines

Where can I get the release notes for the first 2.4.18 patch that David made?

They're included in the diff file (linux-2.4.18-ia64-020226.gz). Here they are:

- better ia64 IRQ affinity support (Erich Focht)
- include Firewire configuration for ia64 (Bdale Garbee/Grant Grundler)
- fix ia32 GDT initialization (Don Dugger)
- bump gcc3.x inlining threshold to 2000 to get things to compile with gcc3.1
- don't make ia64 stack and data executable by default and drop lazy-execute bit support; restore original interface for page-fault handler
- fix clone2() stack initialization bug found by Asit Mallick
- implement ia32 emulation for SIOCGIFCONF (Don Dugger)
- fix siginfo kernel data leaking
- make page fault handler pass reason for a SIGSEGV/SIGILL in siginfo.si_isr (see include/asm-ia64/siginfo.h for details)
- /proc/efivars update (Matt Domsch)
- fix I/O SAPIC irq routing (makes ACPI power button events work) (J.I. Lee)
- fix alternate TLB miss handlers to not lose Exception Deferral bit
- MCA update (Jenna Hall)
- update perfmon to v1.0 (Stephane Eranian)
- add PTRACE_GETREGS/PTRACE_SETREGS (Yoav Zach)
- fix handling of .label_state/.copy_state in kernel unwinder
- fix exception handler to not assume that archdata_start is non-NULL for all modules (Bjorn Helgaas)
- move initial kernel stack from region 4 down to region 3
- don't define _HAVE_ARCH_IPV6_CSUM as we don't really have it (Bdale Garbee/Grant Grunderl)
- drop .bias from ld4.bias instruction in spinlock code to avoid CPU errata (Asit Mallick)