Skip to contentSkip to conversation

Request for merging of two sets of redundant SGI IA64

Linux-ia64 Steven Cole 3 participants 4 messages Sep 9, 2002 – Sep 12, 2002

lore
Share & tools
lore
#0 lore raw

Greetings,

Could one of you help resolve the following very trivial problem. In 2.4.20-pre5 Documentation/Configure.help, there exists two Configure.help entries for CONFIG_IA64_SGI_SN_SIM and CONFIG_IA64_SGI_SN_DEBUG.

The configurators will of course only display the first of the two. Would someone please indicate which of the texts is the more accurate or combine them as you see fit. You can send me the results or make up a patch yourself.

If this is a moot point, deleting the second text would be the default thing to do.

Thanks,
Steven
(Configure.help maintainer)

1st text for CONFIG_IA64_SGI_SN_SIM:

CONFIG_IA64_SGI_SN_SIM
Build a kernel that runs on both the SGI simulator AND on hardware. There is a very slight performance penalty on hardware for including this option.

2nd text for CONFIG_IA64_SGI_SN_SIM:

Enable SGI Medusa Simulator Support CONFIG_IA64_SGI_SN_SIM
If you are compiling a kernel that will run under SGI's IA64 simulator (Medusa) then say Y, otherwise say N.

--------------------------------------------------------------------------

1st text for CONFIG_IA64_SGI_SN_DEBUG:

CONFIG_IA64_SGI_SN_DEBUG
This enables addition debug code that helps isolate platform/kernel bugs. There is a small but measurable performance degradation when this option is enabled.

2nd text for CONFIG_IA64_SGI_SN_DEBUG:

Enable SGI SN extra debugging code
CONFIG_IA64_SGI_SN_DEBUG
Turns on extra debugging code in the SGI SN (Scalable NUMA) platform for IA64. Unless you are debugging problems on an SGI SN IA64 box, say N.

#1 lore raw

Re: [Linux-ia64] [trivial] Request for merging of two sets of redundant SGI IA64 Configure.help text

You can just go ahead and delete the second version of each of the options if you'd like.

Thanks,
Jesse

Quoted 57 lines · Steven Cole

Greetings,

Could one of you help resolve the following very trivial problem. In 2.4.20-pre5 Documentation/Configure.help, there exists two Configure.help entries for CONFIG_IA64_SGI_SN_SIM and CONFIG_IA64_SGI_SN_DEBUG.

The configurators will of course only display the first of the two. Would someone please indicate which of the texts is the more accurate or combine them as you see fit. You can send me the results or make up a patch yourself.

If this is a moot point, deleting the second text would be the default thing to do.

Thanks,
Steven
(Configure.help maintainer)

1st text for CONFIG_IA64_SGI_SN_SIM:

CONFIG_IA64_SGI_SN_SIM
Build a kernel that runs on both the SGI simulator AND on hardware. There is a very slight performance penalty on hardware for including this option.

2nd text for CONFIG_IA64_SGI_SN_SIM:

Enable SGI Medusa Simulator Support CONFIG_IA64_SGI_SN_SIM
If you are compiling a kernel that will run under SGI's IA64 simulator (Medusa) then say Y, otherwise say N.

--------------------------------------------------------------------------

1st text for CONFIG_IA64_SGI_SN_DEBUG:

CONFIG_IA64_SGI_SN_DEBUG
This enables addition debug code that helps isolate platform/kernel bugs. There is a small but measurable performance degradation when this option is enabled.

2nd text for CONFIG_IA64_SGI_SN_DEBUG:

Enable SGI SN extra debugging code
CONFIG_IA64_SGI_SN_DEBUG
Turns on extra debugging code in the SGI SN (Scalable NUMA) platform for IA64. Unless you are debugging problems on an SGI SN IA64 box, say N.

_______________________________________________
Linux-IA64 mailing list
[email protected]
http://lists.linuxia64.org/lists/listinfo/linux-ia64

#2 lore raw

Re: [Linux-ia64] [trivial] Request for merging of two sets of redundant SGI IA64Configure.help texts

In reply to Steven Cole
Quoted 5 lines · Steven Cole

Could one of you help resolve the following very trivial problem. In 2.4.20-pre5 Documentation/Configure.help, there exists two Configure.help entries for CONFIG_IA64_SGI_SN_SIM and CONFIG_IA64_SGI_SN_DEBUG.

Quoted 7 lines

The configurators will of course only display the first of the two. Would someone please indicate which of the texts is the more accurate or combine them as you see fit. You can send me the results or make up a patch yourself.

If this is a moot point, deleting the second text would be the default thing to do.

The first set is wrong. There is also an error in ia64/config.in for one of these variables. Patch against 2.4.19.

Configure.help renamed from Configure.help.orig +0 -10
@@ -24409,16 +24409,6 @@
 
   If you don't know what to do, choose "generic".
 
-CONFIG_IA64_SGI_SN_SIM
-  Build a kernel that runs on both the SGI simulator AND on hardware.
-  There is a very slight performance penalty on hardware for including this
-  option.
-
-CONFIG_IA64_SGI_SN_DEBUG
-  This enables addition debug code that helps isolate
-  platform/kernel bugs. There is a small but measurable performance
-  degradation when this option is enabled.
-
 # Choice: pagesize
 Kernel page size
 CONFIG_IA64_PAGE_SIZE_4KB
ia64/config.in renamed from ia64/config.in.orig +1 -1
@@ -75,7 +75,7 @@
 
 if [ "$CONFIG_IA64_SGI_SN1" = "y" ] || [ "$CONFIG_IA64_SGI_SN2" = "y" ]; then
 	define_bool CONFIG_IA64_SGI_SN y
-	bool '  Enable extra debugging code' CONFIG_IA64_SGI_SN_DEBUG n
+	bool '  Enable extra debugging code' CONFIG_IA64_SGI_SN_DEBUG
 	bool '  Enable SGI Medusa Simulator Support' CONFIG_IA64_SGI_SN_SIM
 	bool '  Enable autotest (llsc). Option to run cache test instead of booting' \
 			CONFIG_IA64_SGI_AUTOTEST n
#3 lore raw

Re: [Linux-ia64] [trivial] Request for merging of two sets of

In reply to Steven Cole
Quoted 41 lines · Keith Owens
Quoted 5 lines · Steven Cole

Could one of you help resolve the following very trivial problem. In 2.4.20-pre5 Documentation/Configure.help, there exists two Configure.help entries for CONFIG_IA64_SGI_SN_SIM and CONFIG_IA64_SGI_SN_DEBUG.

Quoted 7 lines

The configurators will of course only display the first of the two. Would someone please indicate which of the texts is the more accurate or combine them as you see fit. You can send me the results or make up a patch yourself.

If this is a moot point, deleting the second text would be the default thing to do.

The first set is wrong. There is also an error in ia64/config.in for one of these variables. Patch against 2.4.19.

Configure.help renamed from Configure.help.orig +0 -10
@@ -24409,16 +24409,6 @@
 
   If you don't know what to do, choose "generic".
 
-CONFIG_IA64_SGI_SN_SIM
-  Build a kernel that runs on both the SGI simulator AND on hardware.
-  There is a very slight performance penalty on hardware for including this
-  option.
-
-CONFIG_IA64_SGI_SN_DEBUG
-  This enables addition debug code that helps isolate
-  platform/kernel bugs. There is a small but measurable performance
-  degradation when this option is enabled.
-
 # Choice: pagesize
 Kernel page size
 CONFIG_IA64_PAGE_SIZE_4KB

ia64/config.in line 81

Quoted 8 lines
ia64/config.in renamed from ia64/config.in.orig +1 -1
@@ -75,7 +75,7 @@
 
 if [ "$CONFIG_IA64_SGI_SN1" = "y" ] || [ "$CONFIG_IA64_SGI_SN2" = "y" ]; then
 	define_bool CONFIG_IA64_SGI_SN y
-	bool '  Enable extra debugging code' CONFIG_IA64_SGI_SN_DEBUG n
+	bool '  Enable extra debugging code' CONFIG_IA64_SGI_SN_DEBUG
 	bool '  Enable SGI Medusa Simulator Support' CONFIG_IA64_SGI_SN_SIM
 	bool '  Enable autotest (llsc). Option to run cache test instead of booting' \
 			CONFIG_IA64_SGI_AUTOTEST n

Thanks Keith.

Alan, please don't apply the patch I sent with this subject line:

[PATCH] 2.4.20-pre5-ac4 Configure.help duplicate entry cleanup.

That patch removes the wrong set of texts according to Keith.

I'll generate another patch next release if I don't hear anything which contradicts the above.

Steven