ski and gcc-3.x
hi,
two questions really....
1. is linux-2.5.x on ski supposed to work?
2. is there a version of ski that works with gcc-3.2?
the latest ski i can find (0.94311) doesn't work with gcc-3.2 built kernels. On startup it gives:
BFD: Dwarf Error: Invalid or unhandled FORM value: 14.
iirc this is a DWARF debug directive that was introduced in gcc around gcc-3.1 or so....
randolph
Signature · 3 lines
Randolph Chung Debian GNU/Linux Developer, hppa/ia64 ports http://www.tausq.org/
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line · Randolph Chung
Randolph> hi, two questions really....
Randolph> 1. is linux-2.5.x on ski supposed to work?
Yes, I use it all the time. 2.5.60 certainly works.
Randolph> 2. is there a version of ski that works with gcc-3.2?
Yes.
Randolph> the latest ski i can find (0.94311) doesn't work with Randolph> gcc-3.2 built kernels. On startup it gives: BFD: Dwarf Randolph> Error: Invalid or unhandled FORM value: 14.
That's only a warning though, right? It should be harmless.
In any case: I currently have v0.9.81l1 of Ski in alpha testing and beta testing should start next week. If you can wait till then, that would be easiest. Otherwise, let me know and I'll see about sending you the current test-binary.
--david
Quoted 1 line
That's only a warning though, right? It should be harmless.
no, ski segfaults right after that.
I recompiled 2.5.60 without -g and it loads, but when i run it, it says:
* run
Unable to create console window
21 insts (0 faults), 0.01 sec, 4086 i/s
(i'm running this remotely, so no X ...)
Quoted 4 lines
In any case: I currently have v0.9.81l1 of Ski in alpha testing and beta testing should start next week. If you can wait till then, that would be easiest. Otherwise, let me know and I'll see about sending you the current test-binary.
ok, this can wait :)
thanks,
randolph
Signature · 3 lines
Randolph Chung Debian GNU/Linux Developer, hppa/ia64 ports http://www.tausq.org/
Quoted 3 lines
Quoted 3 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line · Randolph Chung
That's only a warning though, right? It should be harmless.
Randolph> no, ski segfaults right after that.
Hmmh, that's odd. In any case, the new version should fix that.
Randolph> * run Unable to create console window
Randolph> (i'm running this remotely, so no X ...)
I'm afraid you'll be out of luck without X: you _can_ run in batch-mode without X, but then you don't get the debugger. If you want the debugger, there must be a way to create a simulated console and that's done by starting a slave xterm. Without X, that's hard to do. If I work remotely, I use ssh X forwarding to prevent this problem.
--david
Quoted 6 lines
I'm afraid you'll be out of luck without X: you _can_ run in batch-mode without X, but then you don't get the debugger. If you want the debugger, there must be a way to create a simulated console and that's done by starting a slave xterm. Without X, that's hard to do. If I work remotely, I use ssh X forwarding to prevent this problem.
ah, ok... Matt's fake-xterm program was very useful too...
now i just have to figure out what i'm doing wrong and why it doesn't see the simulated scsi disk... :(
I'm running ski with:
ski linux-2.5.60/bootloader linux-2.5.60/vmlinux simscsi=/var/ski-disks/sd
and all i see is:
scsi0 : simulated SCSI host adapter
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Cannot open root device "" or 08:01
Please append a correct "root=" boot option
Kernel panic: VFS: Unable to mount root fs on 08:01
confused,
randolph
Signature · 3 lines
Randolph Chung Debian GNU/Linux Developer, hppa/ia64 ports http://www.tausq.org/
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line · Randolph Chung
Randolph> now i just have to figure out what i'm doing wrong and why Randolph> it doesn't see the simulated scsi disk... :(
Randolph> I'm running ski with: ski linux-2.5.60/bootloader Randolph> linux-2.5.60/vmlinux simscsi=/var/ski-disks/sd
Randolph> and all i see is:
Randolph> VFS: Cannot open root device "" or 08:01
Did you verify that you have write access on /var/ski-disks/sda?
--david
Quoted 1 line
Did you verify that you have write access on
/var/ski-disks/sda?
yes, but i didn't read the instructions carefully enough so i thought if i had simscsi=/var/ski-disks/sd my disk file is also called /var/ski-disks/sd (instead of .../sda)
it's booting now with 1.30 bogomips :-)
thanks,
randolph
Signature · 3 lines
Randolph Chung Debian GNU/Linux Developer, hppa/ia64 ports http://www.tausq.org/
Quoted 3 lines
Quoted 3 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line · Randolph Chung
Did you verify that you have write access on
/var/ski-disks/sda?
Randolph> yes, but i didn't read the instructions carefully enough Randolph> so i thought if i had simscsi=/var/ski-disks/sd my disk Randolph> file is also called /var/ski-disks/sd (instead of .../sda)
Randolph> it's booting now with 1.30 bogomips :-)
Great! 1.30 bogomips is the right number (it's deterministic and not dependent on the simulation speed).
--david