how linux support ccnuma system?
Hi Rich,
Glad to receive your email about EFI.
I have some questions to ask you.
Quoted 13 lines
Some general comments on our experience with using Intel's SAL and PAL on our Altix system (up to 64p SSI):
-The PAL spec specifies whether functions must be called by each CPU, or has a system wide effect and may be called by any one CPU. In general most all PAL functions operate only on, and retrieve info for, just the calling CPU.
-The SAL spec also specifies this. The SAL spec expects that memory is globally accessible. Most SAL functions operate on a shared global data structure, and specify that only one CPU need make a call to set state for all CPUs.
-We have found very little problem with PAL & SAL in our global shared memory system.
Quoted 4 lines
The right way to figure out your situation is to proceed:
a) get a detailed spec from your hardware designer as to exactly what operations are "propagated" between FSBs, and which software has to be responsible for.
I do not know which mean FSBs? Can you give me some explanation?
Quoted 4 lines
b) understand very clearly how physical address space is being shared,
and the global view each CPU will have. Hardware designs can do
bizarre things in providing partial sharing. You should argue these things are foolish if they are not readily supportable by software.
Which mean provide partial sharing? Can each cpu have its local memory and do not shared all cpus?
Quoted 1 line
I hope this is helpful,
Very helpful. Thanks.
Barry
_________________________________________________________________
享用世界上最大的电子邮件系统— MSN Hotmail。 http://www.hotmail.com