hardware error state at cmc
Hello,
could anyone give me a hint about the meaning of the following appearing in system.log (i2000, 2.6.0-test4, uptime ~40 days):
kernel: +BEGIN HARDWARE ERROR STATE AT CMC kernel: +Err Record ID: 37 SAL Rev: 0.02 kernel: +Time: 12/03/2003 18:56:34 Severity 258 kernel: +Processor Device Error Info Section kernel: Processor Error Map: 0x4000 kernel: Processor State Param: 0x8000000fff611b0 kernel: Processor LID: 0x3000000 kernel: + Cache check info[0] kernel: + Level: L0, Index: 0, Operation: Unknown, kernel: CPUID Regs: 0x49656e69756e6547 0x6c65746e 0x0 0x7000804 kernel: +END HARDWARE ERROR STATE AT CMC
thanks
christian
Quoted 4 lines
Hello,
could anyone give me a hint about the meaning of the following appearing in system.log (i2000, 2.6.0-test4, uptime ~40 days):
Quoted 11 lines
kernel: +BEGIN HARDWARE ERROR STATE AT CMC kernel: +Err Record ID: 37 SAL Rev: 0.02 kernel: +Time: 12/03/2003 18:56:34 Severity 258 kernel: +Processor Device Error Info Section kernel: Processor Error Map: 0x4000 kernel: Processor State Param: 0x8000000fff611b0 kernel: Processor LID: 0x3000000 kernel: + Cache check info[0] kernel: + Level: L0, Index: 0, Operation: Unknown, kernel: CPUID Regs: 0x49656e69756e6547 0x6c65746e 0x0 0x7000804 kernel: +END HARDWARE ERROR STATE AT CMC
One of your processors had a correctible error in its cache. The cpu fixed it, but interrupted the OS to tell you it that it happened.
The "Processor LID" field should tell you which cpu had the error (should match the "cr.lid" value of one of you cpus). This is probably the 37th error since system reset (Error Record ID is 37). You might want to check your logs to see what kinds of errors were reported for the previous 36 errors to see if there is any sort of pattern (which may indicate real hardware problems). If the errors are of different types, and reported by different processors, then you may just be seeing stray neutrons flipping bits as they pass through.
You might also want to get 2.6.0-test11 and apply Keith Owens patch
http://marc.theaimsgroup.com/?l=linux-ia64&m6974968032730&w=2 to get easier to read logs, together with Keith's "salinfo" package, which Bjorn hosted at:
ftp://ftp.kernel.org/pub/linux/kernel/people/helgaas/salinfo-0.4.tar.gz
-Tony Luck