Doc/sound/VIBRA16
Subsystems (2)
Appended patch has corrections and minor update for Documentation/sound/VIBRA16
These changes are based on my experience with VIBRA16 and 2.2.21-pre2 on Debian Potato on a Compaq Deskpro (which seems to manage all the ISApnp itself :-).
Regards,
Neale.
Documentation/sound/VIBRA16 +9 -1
@@ -15,6 +15,8 @@ (tried it with a 2.2.2-ac7), nor in the commercial OSS package (it reports it as half-duplex soundcard). Oh, I almost forgot, the RedHat sndconfig failed detecting it ;) + Kernel 2.2.21pre2 also works with this card. /proc/sound +reports "OSS/Free:3.8s2++-971130" and "Sound Blaster 16 (4.13) (DUPLEX)" So, the big problem still remains, because the sb module wants a 8-bit and a 16-bit dma, which we could not allocate for vibra... it supports only two 8-bit dma channels, the second one will be passed to the module
@@ -59,6 +61,8 @@ you may want to: modprobe sb io=0x220 irq=5 dma=1 dma16=3 +# do you need MIDI? +modprobe opl3 io=0x388 Or, take the hard way:
@@ -67,14 +71,18 @@ insmod uart401 insmod sb io=0x220 irq=5 dma=1 dma16=3 # do you need MIDI? -insmod opl3=0x388 +insmod opl3 io=0x388 Just in case, the kernel sound support should be: CONFIG_SOUND=m CONFIG_SOUND_OSS=m CONFIG_SOUND_SB=m +# do you need MIDI? YM3812 gets you opl3.o... +CONFIG_SOUND_YM3812=m Enjoy your new noisy Linux box! ;) +Minor corrections and updates + Neale Banks <[email protected]> Mon, 28 Jan 2002 15:06:35 +1100