Skip to contentSkip to conversation

Desperately Seeking *#$^@^@% AWE64 Help :)

DISCUSSION CaT 3 participants 3 messages Sep 14, 1998 Sound

lore
Share & tools
lore

CaT

author
#0 lore raw

Well I've read every document I can find on installing the AWE64.

I've gone to the awedrv website.

I've spent close to 20hrs on #linux asking for help, getting it and trying to get the SOB working.

I tried the OSS drivers with 2.0.35.

I've installed 2.1.121 to try to get it working.

I told it I would wish cancer on it if it didn't start to work.

I contemplating sacraficing a goat...

And yet still the damned thing doesn't work and so now I'm going for what is my avenue of last resort. This list. Did I miss something important? Am I just a clueless git? (DON'T answer that. :) Is reality against me? Help.

My config as it stands (more or less. I'll spam with more detail if requested)

In the kernel compile all options are set as module. Sound, old fm stuff (typing this from memory), oss dirvers and the lowlevel driver.

pnp configured by changing the dump of pnpdump and uncommenting the right lines plus adding 2 for the wavetable stuff. isapnp is seemingly happy and gives me a single line responce with a bunch of hex numbers and so on.

modprobe sound seems to work. it doesn't whine but neither does it produce any output.

insmod iso406 (I think that's the right number. again, doing it from memory) barfs, pukes and generally paints the screen technicolour with error msgs about not being able to find internal labels. ie it finds it but when it tries to deal with it it cannot figure out where to point stuff.

same with sb and the others (as stated in the HOWTO on AWE32 in the kernel distrib. I think. I've read so many I'm losing count).

I know there's not much info here but if someone expresses interest in helping out I'll go to the hassle of getting whatever data is req when I get home tonight.

Thanks muchly.

Signature · 5 lines
CaT ([email protected])                       URL: http://www.zip.com.au/dev/null

    There was farting in the air that night,
        It lit so bright,
            Fernando...
#1 lore raw
Quoted 4 lines
Quoted 4 lines

pnp configured by changing the dump of pnpdump and uncommenting the right lines plus adding 2 for the wavetable stuff. isapnp is seemingly happy and gives me a single line responce with a bunch of hex numbers and so on.

Ok, lets check couple of things..

Isapnp outputs something like this:

Board 1 has Identity 7f 0c 86 2c bd 9e 00 8c 0e: CTL009e Serial No 210119869 [checksum 7f]

?

What do cat /dev/sndstat , cat /proc/interrupts etc. show after this ?

I need to put the following in /etc/conf.modules to get things going:

alias char-major-14 sb
alias sound sb
options sb io=0x220 irq=5 dma=1 dma16=5 mpu_io=0x330

Quoted 2 lines
Quoted 2 lines

modprobe sound seems to work. it doesn't whine but neither does it produce any output.

Try cat /dev/sndstat after that.

	--j
#2 lore raw
In reply to CaT

Sorry, can't help with your problem, but...

There has recently ben some VERY interesting discussion about getting the AWE64 working under linux
on the linux-sound mailing list.

linux-sound, like this list, can be found
at vger.rutgers.edu

Good luck...

Bryan

Quoted 56 lines

Well I've read every document I can find on installing the AWE64.

I've gone to the awedrv website.

I've spent close to 20hrs on #linux asking for help, getting it and trying to get the SOB working.

I tried the OSS drivers with 2.0.35.

I've installed 2.1.121 to try to get it working.

I told it I would wish cancer on it if it didn't start to work.

I contemplating sacraficing a goat...

And yet still the damned thing doesn't work and so now I'm going for what is my avenue of last resort. This list. Did I miss something important? Am I just a clueless git? (DON'T answer that. :) Is reality against me? Help.

My config as it stands (more or less. I'll spam with more detail if requested)

In the kernel compile all options are set as module. Sound, old fm stuff (typing this from memory), oss dirvers and the lowlevel driver.

pnp configured by changing the dump of pnpdump and uncommenting the right lines plus adding 2 for the wavetable stuff. isapnp is seemingly happy and gives me a single line responce with a bunch of hex numbers and so on.

modprobe sound seems to work. it doesn't whine but neither does it produce any output.

insmod iso406 (I think that's the right number. again, doing it from memory) barfs, pukes and generally paints the screen technicolour with error msgs about not being able to find internal labels. ie it finds it but when it tries to deal with it it cannot figure out where to point stuff.

same with sb and the others (as stated in the HOWTO on AWE32 in the kernel distrib. I think. I've read so many I'm losing count).

I know there's not much info here but if someone expresses interest in helping out I'll go to the hassle of getting whatever data is req when I get home tonight.

Thanks muchly.

Signature · 5 lines
CaT ([email protected])                       URL: http://www.zip.com.au/dev/null

    There was farting in the air that night,
        It lit so bright,
            Fernando...