Was: Re: SB32 Problem (fwd) now AWE32 micro-howto
Hello,
I posted this answer 3 days ago... but similar questions keep showing up, guess It can pass as an AWE/SB 32 mini-mini howto...
There's a HOWTO, anyway, and you should also check the Sound-HOWTO and the docs under /usr/src/linux/drivers/sound
Regards,
Raymond ... I have a proposal at the end. :)
Quoted 9 lines · Ricardo Peres
Quoted 8 lines
I have two problems: first, I cannot play midi files in Linux. I have RedHat 5.1 and a SoundBlaster 32 soundcard, have sound compiled in
Second, although I compiled the kernel with the SB32 low-level driver from http://bahamut.mm.t.u-tokyo.ac.jp/~iwai/awedrv/ as a module, whenever I try to
insmod sbaweI get a message saying: "AWE32: not detected". It is true that my soundcard is NOT a SB AWE32, just a SB32,
1- I assume you're initializing the card via isapnptools at boot... There's one caveat though: pnpdump fails to detect all the 3 ioports to the wavetable (...er, I'm talking AWE here, but maybe it's the same) So check your pnpconfig, in the wavetable section it SHOULD init 3 ioports, in my case they're: (ymmv)
(CONFIGURE CTL0039/23833 (LD 2 (IO 0 (BASE 0x0620)) (IO 1 (BASE 0x0A20)) <---\___ add these lines. (IO 2 (BASE 0x0E20)) <---/ (ACT Y) ))
2- You have to insmod the modules in proper order, preferably insmoding sound.o at boot time (DMA buffer space allocation gets scarce), and the rest whenever you like. I have sound.o insmoded in rc.local, and a script called sound, as follows:
(remember: sound.o gets modprobed at boottime)
#!/bin/sh for ext MIDI: /sbin/insmod uart401 the main mod: /sbin/insmod sb io=0x220 irq=5 dma=0 dma16=5 type=5 for old FM: /sbin/insmod opl3 io=0x388 for wavetable: /sbin/insmod sbawe
(remember, though, that for kernels 2.1.x it's a different story) (actually sound.o is now 3 distinct parts, but kerneld takes care, just make sure you *modprobe* the module @ boot, not just insmod it) (sbawe.o is called awe_wave.o after 2.1.x)
(btw, recent kernels [later than 2.0.33 i think] include the awe module, don't attempt to patch'em)
(... unless of course, u know what u're doing)
3- Finally, to hear anything from the wavetable, you've got to upload some samples to it (i.e. sfbanks, either *.sbk or *.sf2), for which theres a beautifull utility called sfxload available at your nearest bahamut mirror.(guess there's a rpm @ redhat too)
Precision: Both the SB32 and the AWE32 use sfbanks to configure the EMU8000 patches, the difference being that AWE32 also accepts external samples which the SB32 can't (it lacks onboard RAM), aside that *little* fact, both cards ard identical. (both of them have onboard ROM samples)
Conclussion: I know (for I went through it) how frustrating it can be to get your SB going, especially later on when you'll want full duplex, opl3, external midi AND wave, but the key ingredient here is patience, and IT DOES HELP to take a look at the sources.
(hint: /usr/src/linux/drivers/sound/<whatever, especially docs>)
Now here's my wish :)...
"Graphical Soundfont patch editor/librarian"
I've played a little with sfxload and the related programs that come with it (sf2text, text2sf), and also with the CLS supplied "vienna soundfont editor". It is clear to me that the linux tools have come to be far superior and versatile, though we (awe'rs) are still lacking a fundamental
thing: a nice and simple (...er, easy, intuitively fast) GUI for all of this, 'cause I still regret knowing what a good & powerfull sampler the EMU8000 is and how sad it to have it locked in a (non)software cage. I'm preety busy in my job now, but I'd like to embark in such project as soon as I'm done (nov/dec)... anyone interested in joining the effort? (i.e. I *love* the virual keyboard in Vienna that allows you to monitor your patch as you edit it, I wonder how this "dynamic" uploading is done. Guess it's buried in the AWE tech docs...)
Regards,
Raymond
Quoted 31 lines · Raymond Hall
2- You have to insmod the modules in proper order, preferably insmoding sound.o at boot time (DMA buffer space allocation gets scarce), and the rest whenever you like. I have sound.o insmoded in rc.local, and a script called sound, as follows:
(remember: sound.o gets modprobed at boottime)
#!/bin/sh for ext MIDI: /sbin/insmod uart401 the main mod: /sbin/insmod sb io=0x220 irq=5 dma=0 dma16=5 type=5 for old FM: /sbin/insmod opl3 io=0x388 for wavetable: /sbin/insmod sbawe(remember, though, that for kernels 2.1.x it's a different story) (actually sound.o is now 3 distinct parts, but kerneld takes care, just make sure you *modprobe* the module @ boot, not just insmod it) (sbawe.o is called awe_wave.o after 2.1.x)
(btw, recent kernels [later than 2.0.33 i think] include the awe module, don't attempt to patch'em)
(... unless of course, u know what u're doing)3- Finally, to hear anything from the wavetable, you've got to upload some samples to it (i.e. sfbanks, either *.sbk or *.sf2), for which theres a beautifull utility called sfxload available at your nearest bahamut mirror.(guess there's a rpm @ redhat too)
Precision: Both the SB32 and the AWE32 use sfbanks to configure the EMU8000 patches, the difference being that AWE32 also accepts external samples which the SB32 can't (it lacks onboard RAM), aside that *little* fact, both cards ard identical. (both of them have onboard ROM samples)
Quoted 6 lines
Conclussion: I know (for I went through it) how frustrating it can be to get your SB going, especially later on when you'll want full duplex, opl3, external midi AND wave, but the key ingredient here is patience, and IT DOES HELP to take a look at the sources.
(hint: /usr/src/linux/drivers/sound/<whatever, especially docs>)
Quick question... I finally got my SB32 working under Linux from a cold boot (instead of booting into DR-DOS then warm booting into Linux) by using the isapnptools trick you told us about (thank you very much!!) However, I've noticed (even before isapnptools worked for me), that whenever I attempt to play a midi or a s3m or mod file, the program will segfault. If I understand correctly, it is because I do not have wavetable setup correctly-- or-- these other modules...I have the 3.8s version of OSS/Free on a 2.0.35 Slackware system... I compile sound as a module, but I only get the one module-- sound.o ...where does one go about getting the opl, etc. modules from??
Also- a question of a different color- If I wanted to hook up a MIDI keyboard or other MIDI instrument to my machine, I would of course need that external midi module, but would the "Game Port" need to be enabled or disabled? I have a game card in my machine which provides me with 2 game ports, and I do not need the additional ones of my sound and i/o card so they are disabled.
Thanks for your time.
Quoted 7 lines · Raymond Hall
1- I assume you're initializing the card via isapnptools at boot... There's one caveat though: pnpdump fails to detect all the 3 ioports to the wavetable (...er, I'm talking AWE here, but maybe it's the same) So check your pnpconfig, in the wavetable section it SHOULD init 3 ioports, in my case they're: (ymmv)
Quoted 6 lines
(CONFIGURE CTL0039/23833 (LD 2 (IO 0 (BASE 0x0620)) (IO 1 (BASE 0x0A20)) <---\___ add these lines. (IO 2 (BASE 0x0E20)) <---/ (ACT Y) ))
This is laready mentioned in my howto.
Quoted 4 lines
2- You have to insmod the modules in proper order, preferably insmoding sound.o at boot time (DMA buffer space allocation gets scarce), and the rest whenever you like. I have sound.o insmoded in rc.local, and a script called sound, as follows:
[snipped]
Thank you for the additional information about the new kernel releases. I have more information in my archive, but didn't come to update my Howto. I promise that it'll be done at the time 2.2.x kernels come out.
Quoted 4 lines
3- Finally, to hear anything from the wavetable, you've got to upload some samples to it (i.e. sfbanks, either *.sbk or *.sf2), for which theres a beautifull utility called sfxload available at your nearest bahamut mirror.(guess there's a rpm @ redhat too)
Yep, it's in my howto, too.
Thank you,
Marcus
Signature · 4 lines
"Rhubarb is no Egyptian god." Debian GNU/Linux finger brinkmd@ Marcus Brinkmann http://www.debian.org master.debian.org [email protected] for public PGP Key http://homepage.ruhr-uni-bochum.de/Marcus.Brinkmann/ PGP Key ID 36E7CD09