Skip to contentSkip to conversation

SoundBlasterPCI128

DISCUSSION Balaguru Nallathambi 3 participants 10 messages Jan 7, 1999 – Jan 15, 1999 Sound

lore
Share & tools
lore
#0 lore raw

HI,
I have a SoundBlaster PCI 128. Does linux have support for this.
Are there any drivers for this card, which I can download.

I compiled the kernel with the sound as a module. The kernel could not detect the sound card.

Thanks in advance,
-)Bala.

#1 lore raw
Quoted 7 lines · Balaguru Nallathambi

HI,
I have a SoundBlaster PCI 128. Does linux have support for this.
Are there any drivers for this card, which I can download.

I compiled the kernel with the sound as a module. The kernel could not detect the sound card.

CONFIG_EXPERIMENTAL=y
CONFIG_SOUND_ES1371=y or m

You need either 2.0.36 plus Alan Cox modular sound patch or 2.2.pre

Tom

#4 lore raw
In reply to Balaguru Nallathambi

I downloaded the modular sound patch from Alan Cox's web site. and applied it to kernel 2.0.36

I did a "make xconfig" and clicked on Sound. ( I also tried make config and make menuconfig) I still could not find the ES1371 driver listed there. I also looked in the .config file in the source tree. It is not listed there.

I am bit reluctant to install the 2.2.pre kernel.
Since it is still under development I am worried it may do something tomy harddisk.

If anyone has the source for the kernel with ES1371 driver pls. give me a pointer to it.

Thanks in advance.
-)Bala.

Quoted 18 lines · you
Quoted 7 lines · Balaguru Nallathambi

HI,
I have a SoundBlaster PCI 128. Does linux have support for this.
Are there any drivers for this card, which I can download.

I compiled the kernel with the sound as a module. The kernel could not detect the sound card.

CONFIG_EXPERIMENTAL=y
CONFIG_SOUND_ES1371=y or m

You need either 2.0.36 plus Alan Cox modular sound patch or 2.2.pre

Tom

#5 lore raw
In reply to Balaguru Nallathambi

Hi,

Quoted 2 lines

I downloaded the modular sound patch from Alan Cox's web site. and applied it to kernel 2.0.36

I'm trying the same at the moment.
How did you apply the patch (and which, I read the 2.0.34-modular-3.patch.gz should me the safest...)?

Whenever I get the patch installed, I'm a step further! Thanks + bye
Georg

#6 lore raw
In reply to Balaguru Nallathambi

At 09:00 PM 1/13/99 +0100, you wrote:

To apply the patch all you have to do is

zcat 2.0*patch*gz | patch -p0

on the linux source tree.
The source tree will have the patch applied now.
Then you need to do a make clean, make config, make dep, make zImage
and use the boot image to load a new kernel.

The problem I have is that I cannot see the ES1371 driver in the
kernel configuration options. So I did not even make the kernel.

I guess we need help from some one who has successfully done this before. If you get everything done right, let me know.

-)Bala.

Quoted 14 lines

Hi,

Quoted 2 lines

I downloaded the modular sound patch from Alan Cox's web site. and applied it to kernel 2.0.36

I'm trying the same at the moment.
How did you apply the patch (and which, I read the 2.0.34-modular-3.patch.gz should me the safest...)?

Whenever I get the patch installed, I'm a step further! Thanks + bye
Georg

#8 lore raw
In reply to Balaguru Nallathambi

Thanks. I guess I had the wrong patch (2.0.36*patch*) applied. That's why the ES1371 driver did not show up.
THe 2.0.34*patch* has the ES1371 driver.

I have one more problem.
I have slackware dirstribution of LINUX which has gcc2.8
I guess to compile the 2.0.36 kernel with the patch applied
we need gcc2.7. I could not compile the kernel with my version of gcc2.8.
Is it possible or valid to apply the patch to a newer version of the kernel source say 2.1.99 ? Will this compile with gcc2.8

Thanks,
-)Bala.

Quoted 8 lines · you
Quoted 2 lines

The problem I have is that I cannot see the ES1371 driver in the
kernel configuration options. So I did not even make the kernel.

You need to enable CONFIG_EXPERIMENTAL

Tom

#9 lore raw
In reply to Balaguru Nallathambi

Hi,

Quoted 2 lines

Thanks. I guess I had the wrong patch (2.0.36*patch*) applied. That's why the ES1371 driver did not show up.

linux detects on my Creative SoundBlasterPCI128 a ES1370 and it works! So do not concentrate too much on the ES1371, better try the Modules ES1370 AND ES1371, then you'll see, what the sndconfig detects after booting with the new Kernel.

Good night
Georg