Skip to contentSkip to conversation

SB16 problem

DISCUSSION Greg Wooledge 1 participant 1 message Jan 13, 1999 Sound

lore
Share & tools
lore
#0 lore raw

Thanks for the responses, everyone! I'll only point out the most interesting comments here, and remove the attributions to preserve a bit of anonymity.

Quoted 4 lines

No. Sad to say, but it is really 8 bit DMA channel. I heard that Vibra does not have 16 bit DMA.

Hence the error.

This unfortunately matches what the manual hints at (but doesn't say outright). In the "BLASTER environment variable" section, it says:

Parameter Description
----------+----------------------------------------------------------------
Hx | High DMA channel used by the audio interface. x defaults to 5.
| Sound Blaster 16 model CT4181 only.

Quoted 2 lines

It's correct however - you don't (most probably) have 16 bit sound working. Only 8bit. Try realplayer and you'll find that out!

Under my original settings, I had to check the 'Disable 16-bit sound' box in rvplayer. However, under my current settings I can hear sounds with the box checked or un-checked. I'm leaving it un-checked.

Quoted 2 lines

I think the vibra cards need a little tweak to the sound driver. I haven't had time to look. Can you check out a recent driver?

I've also downloaded and tried the OSS commercial driver (demo), version osslinux392pre-glibc-220-pre6-UP.tar.gz, with 2.2.0-pre6. I get very similar results -- there appears to be no 16-bit DMA channel.

(It would have been nice if the OSS pages had told me in advance that I'd have to use CONFIG_MODVERSIONS in my kernel for their driver to work. It would have saved me an extra kernel build. Oh, well.)

Quoted 2 lines

(I moved the vibra that came with my new machine to somewhere else and hung on to my classic sb16, which works nicely thank you).

My other soundcard is an sb8. :-( (It's still in my old machine, which is now an IP-masq gateway and NFS server.)

Quoted 5 lines

(DMA 1 (CHANNEL 5))

options sb io=0x220 irq=5 dma=1 dma16=5 mpu_io=0x330

Could you let me know if this works on your setup?

Those are (some of) the lines I had. They do not work with the ViBRA card. I get the same problem I had originally -- no sound when using /dev/dsp, and error messages in dmesg.

In summary, it seems I can get the ViBRA to play 16-bit sounds, but not through a 16-bit DMA channel. I'm getting the "best" results with "options sb io=0x220 irq=5 dma=1 dma16=3 mpu_io=0x330" and the first ("preferred") section in /etc/isapnp.conf. I've successfully played .au, .wav, .mp3 and .ra sound files, so I'm pretty content.

Signature · 3 lines
Greg Wooledge                    | Distributed.NET http://www.distributed.net/
[email protected]             | because a CPU is a terrible thing to waste.
http://www.kellnet.com/wooledge/ |