ESS ES1689 OSS/Free help needed
Hi,
I just upgraded my machine to RH5.2, then upgraded the kernel to 2.0.36-3, and ... these are are black days for me.
As usually the RH sound doesn't work, unfortunately the usual place where I could get a working code ( http://www.4front-tech.com/ossfree ) says it's no longer there, and IT REALLY ISN'T.
NEED HELP. If anyone knows where I can get the Hannu Savolainen's version of OSS/Free, please tell me ( it was there some days/weeks ago, even the version for the 2.0.36 kernel - I checked it, but now ... it's gone ). Please help,
Jacek.
PS. If anyone cares - what's wrong with RH5.2 sound - sndconfig recognizes my card as ES1868 ( not bad ), then it modifies the /etc/conf.modules ( and what it does there is o.k. ). It also creates /etc/isapnp.conf, but I remove it - my card if fully configured by my bios. Then it loads all required modules and the /etc/sndconfig looks well, but ... it doesn't really work :
1. "cat sample.au > /dev/audio" works
2. "cat something.wav > /dev/dsp" produces terrible noise, just like I was doing "cat something.wav > /dev/audio", or "cat something.au > /dev/dsp"
3. "dd bs=8k count=4 < /dev/audio > sample.au" works, I can also get the recorded sample.au played using "cat ... > /dev/audio"
4. "dd bs=8k count=4 < /dev/dsp > sample.wav" works, I can also get the recorded sample.wav played using "cat ... > /dev/dsp"
5. none of recored samples ( from points 3. and 4. ) is in correct format - I cannot play them in Win95 ( I can play the original sample.au used in point 1., which contains the voice of Linus, how he pronounces Linux, in Win95 without problems )
6. "playmidi -f something.mid" ( opl3 ) doesn't work at all - the program simply exits as soon as it is started, "playmidi -r -f something.mid" produces core dump as soon as it is started
7. "playmidi -e (-D0) something.mid" ( uart401+WaveTable ? ) doesn't work at all - the program does something ( you can see that it "plays" if you use the "-r" flag ), but there is no single sound to be heard
Jacek.
Quoted 7 lines · Jacek M. Holeczek
my card as ES1868 ( not bad ), then it modifies the
/etc/conf.modulesrequired modules and the/etc/sndconfiglooks well, but ... it doesn't really work :
1. "cat sample.au >/dev/audio" works
2. "cat something.wav >/dev/dsp" produces terrible noise, just like I was doing "cat something.wav >/dev/audio", or "cat something.au >/dev/dsp"
This is often true under working systems. You need a wav player to really play wavs... It does something a bit more sophisticated than 'cat'.
Quoted 3 lines
3. "dd bs=8k count=4 <
/dev/audio> sample.au" works, I can also
4. "dd bs=8k count=4 </dev/dsp> sample.wav" works, I can also
5. none of recored samples ( from points 3. and 4. ) is in correct
Again, some software is useful here. sox is a well known sound package. What you get from the devices is some raw format, not a well-formed sound file containing a header about the encoding, sample rate, etc.
Quoted 1 line
6. "playmidi -f something.mid" ( opl3 ) doesn't work at all - the
What does cat /proc/sound (or /dev/sndstat) say for Synth Devices? Do your system logs complain about not being able to find a module for synth0? I believe the opl3 driver is in the adlib_card module (though this may vary), does /proc/modules indicate that it is loaded?
Quoted 1 line
7. "playmidi -e (-D0) something.mid" ( uart401+WaveTable ? )
To be expected if you don't have an external midi device.
Good luck,
Kevin
Hi,
As I still cannot get Hannu's sound driver, I need to stick to what exists.
Quoted 2 lines
playmidi for FM synth is broken as shipped in 5.2; there are updated RPMS available at ftp://ftp.redhat.com/home/notting/playmidi/;
Thanks. I downloaded the playmidi and now the OPL3 works ( that is what I expect is used when I do "playmidi -f" ).
Quoted 4 lines
Quoted 4 lines
7. "playmidi -e (-D0) something.mid" ( uart401+WaveTable ? ) doesn't work at all - the program does something ( you can see that it "plays" if you use the "-r" flag ), but there is no single sound to be heard
Sorry, but this behaves the same way.
The /dev/sndstat says it finds a Midi device: "0: ESS 1688" which is not bad ( it should actualy say 1868, as the ES1869 has a shared interrupt, too ), but I still do not get any sound from it.
I expect that in this case ( "playmidi -e -D0" ) it should automatically play using the uart401 + the WaveTable ( Wave Blaster compatible using AdMOS QS1000 + AdMOS QS1001A ) which I do have. Or maybe I should somehow initialize the uart401/WaveTable myself ? Problems with .au and .wav files remain.
In the meantime I tried to play .au file using sox, but the result was pure ( a much better result one gets using "cat" ), then I tried to play .wav files using sox, but the results were also pure - I have the filling that 8bit samples are quite ok, but 16bit samples are wrong ( the ES1869 is 16bit, compatible with 8bit SB/Pro ).
Recording sound using sox gives also pure results ( much better results are there if one uses "dd" ). Samples recorded with sox can be played with win95, but the pure quality remains.
In all cases above ( to play and record ) sox uses /dev/dsp, so maybe there is a problem somewhere there ( I cannot "cat" .wav to /dev/dsp ). Thanks in advance,
Jacek.