cheap pci sound card with full duplex support?
I would like to get a sound card that can do full duplex under linux (ie open /dev/dsp with mode O_RDWR). I see cards like the "Ensoniq AudioPCI" for around 20 bucks that claim to do full duplex, but I don't know whether there's a linux driver.
So, my question: are there sound cards (preferably PCI) for around $20 that have full duplex support under linux? Are the drivers free?
Thanks,
Roland
[email protected]
Quoted 11 lines
I would like to get a sound card that can do full duplex under linux (ie open
/dev/dspwith modeO_RDWR). I see cards like the "Ensoniq AudioPCI" for around 20 bucks that claim to do full duplex, but I don't know whether there's a linux driver.So, my question: are there sound cards (preferably PCI) for around $20 that have full duplex support under linux? Are the drivers free?
Thanks,
Roland
[email protected]
Ensoniq AudioPCI is supported in kernel 2.2.x.
It may also work under 2.0.x with the ALSA drivers ( http://alsa.jcu.cz )
I have a Soundblaster 64 PCI ( which is actually an Ensoniq AudioPCI with a soudblaster sticker on it ) and it works under linux 2.2.1.
Wave out and mixer works , haven't tested the rest. Its a cool card , which support 4 channel sound !
But also have a cosmetic bug - in order to record a sound, you must set it to play ( hear it on the output of your card ), the microphone is an exception, otherwise it would be unusable.
This way you can't play a sound and record it back from AUX-in using a cable to connet ( LINE-out and AUX-in ) , for example to test the characteristics of the card ...
--
David Balazic , student
E-mail : [email protected] | living in sLOVEnija
home page: http://surf.to/stein
Computer: Amiga 1200 + Quantum LPS-340AT
--
Quoted 3 lines · DAVID BALAZIC
But also have a cosmetic bug - in order to record a sound, you must set it to play ( hear it on the output of your card ), the microphone is an exception, otherwise it would be unusable.
I think it should be sufficient to enable a channel as recording source but turn its volume down to 0. But this is indeed on a list to rethink 8-)
Tom
From: Thomas Sailer <[email protected]>
Quoted 9 lines
Quoted 3 lines · DAVID BALAZIC
But also have a cosmetic bug - in order to record a sound, you must set it to play ( hear it on the output of your card ), the microphone is an exception, otherwise it would be unusable.
I think it should be sufficient to enable a channel as recording source but turn its volume down to 0. But this is indeed on a list to rethink 8-)
No , this way you will record silence, because the play volume of a channel is also its record volume :-(
You record what you hear...
--
David Balazic , student
E-mail : [email protected] | living in sLOVEnija
home page: http://surf.to/stein
Computer: Amiga 1200 + Quantum LPS-340AT
--
Quoted 8 lines · DAVID BALAZIC
Ensoniq AudioPCI is supported in kernel 2.2.x.
It may also work under 2.0.x with the ALSA drivers ( http://alsa.jcu.cz )I have a Soundblaster 64 PCI ( which is actually an Ensoniq AudioPCI with a soudblaster sticker on it ) and it works under linux 2.2.1.
Wave out and mixer works , haven't tested the rest. Its a cool card , which support 4 channel sound !
Hi
How good is the quality of this card, compared to cs4231a chip? (From /dev/sndstat, I haven't actually looked at the chip on the card. ) I currently have a problem using full duplex when there is ide disk activity. I have to kill update to make it work, which is probably a bad idea? I have a via chipset.
What is the best quality card (I don't care about wave table stuff, just dac/adc and full duplex)which will work with linux? Preferably with a free driver.
Regards
Rob