Skip to contentSkip to conversation

Driver Writer's Questions

DISCUSSION Bob Miller 2 participants 3 messages Mar 16, 1999 – Mar 17, 1999 Sound

lore
Share & tools
lore

Bob Miller

author
#0 lore raw

Hi. I am trying to write a Linux sound driver. I have some questions that I hope someone here can answer.

1. (the big question) This device requires a single DMA buffer of up to 8 Kb in main memory. It reads/writes the buffer circularly. It can't chain buffers. Can I use the OSS DMA routines to set that up somehow (how?), or do I have to write a non-OSS driver? What does this imply for mmap?

2. This device is capable of telling how many samples it has read/written, with an accuracy of 1 sample. I'd like to export that via the SNDCTL_DSP_GET{I,O}PTR, ioctls, but I can't see how my driver can get control on those ioctls.

3. This device has memory-mapped registers. I want to write a probe routine that can verify that the device is there at the address it's supposed to be. Is there a Linux routine to "read memory and trap any fault"?

4. The mixer doesn't have a capability that corresponds to SOUND_MIXER_VOLUME. If I don't implement SOUND_MIXER_VOLUME, will I be incompatible with 99% of the apps? If I have to, I can fake it -- maintain a SW volume setting and merge it into the level I send to all the other faders...

That's enough questions for now. Hopefully, these are easy for someone who's familiar with the Linux sound architecture.

Thanks for any help.

					K<bob>
#1 lore raw
Quoted 4 lines · Bob Miller

1. (the big question) This device requires a single DMA buffer of up to 8 Kb in main memory. It reads/writes the buffer circularly. It can't chain buffers. Can I use the OSS DMA routines to set that up somehow (how?), or do I have to write a non-OSS driver?

If the device is not ISA, I wouldn't bother fitting it into the OSS framework, a stand alone driver (like I did for some PCI cards) is easier to do and more maitainable.

Quoted 1 line

What does this imply for mmap?

That the DMA buffer mappable is 8k max. The mmap interface is deprecated anyway. I've tried once to emulate the mmap interface on top of read/write, but it never worked well, if you don't want huge latencies.

Quoted 4 lines

2. This device is capable of telling how many samples it has read/written, with an accuracy of 1 sample. I'd like to export that via the SNDCTL_DSP_GET{I,O}PTR, ioctls, but I can't see how my driver can get control on those ioctls.

Take a look at eg. the es1370 driver

Quoted 3 lines

4. The mixer doesn't have a capability that corresponds to SOUND_MIXER_VOLUME. If I don't implement SOUND_MIXER_VOLUME, will I be incompatible with 99% of the apps? If I have to, I can fake

Unlikely

Tom

author
#2 lore raw
In reply to Bob Miller

I asked:

Quoted 4 lines
Quoted 4 lines

1. (the big question) This device requires a single DMA buffer of up to 8 Kb in main memory. It reads/writes the buffer circularly. It can't chain buffers. Can I use the OSS DMA routines to set that up somehow (how?), or do I have to write a non-OSS driver?

Thomas Sailer replied:

Quoted 3 lines

If the device is not ISA, I wouldn't bother fitting it into the OSS framework, a stand alone driver (like I did for some PCI cards) is easier to do and more maitainable.

Thanks a lot for answering!

Quoted 6 lines
Quoted 4 lines

2. This device is capable of telling how many samples it has read/written, with an accuracy of 1 sample. I'd like to export that via the SNDCTL_DSP_GET{I,O}PTR, ioctls, but I can't see how my driver can get control on those ioctls.

Take a look at eg. the es1370 driver

Is the es1370 driver non-OSS, then? Would it be a good model for how to structure a non-OSS driver? My device also has no synth...

					K<bob>